Teitl: A Detailed Study of Tidal Turbine Power Production and Dynamic Loading Under Grid Generated Turbulence and Turbine Wake Operation - data

Dyfyniad
Allmark M, O'Doherty T, Mason-Jones A (2021). A Detailed Study of Tidal Turbine Power Production and Dynamic Loading Under Grid Generated Turbulence and Turbine Wake Operation - data. Cardiff University. http://doi.org/10.17035/d.2020.0124287467


Hawliau Mynediad: Darperir Data dan drwydded Creative Commons Attribution (CC BY 4.0)
Dull Mynediad: I anfon cais i gael y data hwn, ebostiwch opendata@caerdydd.ac.uk

Crewyr y Set Ddata o Brifysgol Caerdydd

Manylion y Set Ddata
Cyhoeddwr: Cardiff University
Dyddiad (y flwyddyn) pryd y daeth y data ar gael i'r cyhoedd: 2021
Dyddiad dechrau creu'r data: 01.04.2018
Dyddiad gorffen creu'r data: 31.03.2019
Fformat y data: .mat
Meddalwedd ofynnol: MATLAB
Amcangyfrif o gyfanswm maint storio'r set ddata: Less than 10 Gigabytes
DOI: 10.17035/d.2020.0124287467

Disgrifiad

The data set contains experimental data collected during towing tank testing of horizontal axis tidal turbine. The 1/20th scale tidal turbine was tested at the IFREMER recirculating flume facility in Boulogne sur mer, France. The data sets included relate to testing under both speed and torque control under grid generated turbilence and tidal turbine wake conditions.

The data sets include measurements taken from instrumentation measuring turbine loading as well as readings taken of  generator/motor parameters. Furthermore, the data sets include readings of a series of Laser Doppler Velocimeter measurements of the flow velocity around the device. 

The data is presented as a .mat workspace. The work space consists of a structure named 'Data'.

The data is presented as a .mat workspace. The work space consists of a structure named 'Data'.

WIthin the structure there are fields for load measurements [Data.RotorData], load measurement instrument zero readings [Data.ZeroData], generator/motor readings [Data.MotorData] and for numerous non-dimensional parameters TSR, CP etc. 

NOTE: Cp1 and Cq2 refer to power and torque coefficients caclulated using rotor data, where as Cp2 and Cq2 refer to the same non-dimensional coeffcients which were calculated using motor data.

Each field has numerous entries which correspond to differing operating rotational velocities.  

A detailed explanation of the testing procedure followed can be found in a journal paper produced on the testing available at

https://doi.org/10.1016/j.renene.2020.12.052


Allweddeiriau

Condition Monitoring Marine Turbine, Marine Energy, Tidal Stream Turbine

Prosiectau Cysylltiedig

Diweddarwyd y tro diwethaf ar 2021-09-03 am 11:22