Teitl: Increasing the processing speed of AFM tip-based nanomachining at the tool-workpiece interface


Dyfyniad
Brousseau E, Geng Y, Gensheimer M, et al. (2017). Increasing the processing speed of AFM tip-based nanomachining at the tool-workpiece interface. Cardiff University. http://doi.org/10.17035/d.2017.0031699446



Nid yw'r data hwn ar gael ar hyn o bryd oherwydd: Bwriad i gyhoeddi canlyniadau prosiect

Dull Mynediad: I anfon cais i gael y data hwn, ebostiwch opendata@caerdydd.ac.uk


Crewyr y Set Ddata o Brifysgol Caerdydd


Manylion y Set Ddata

Cyhoeddwr: Cardiff University

Dyddiad (y flwyddyn) pryd y daeth y data ar gael i'r cyhoedd: 2017

Dyddiad dechrau creu'r data: 01.09.2016

Dyddiad gorffen creu'r data: 23.12.2016

Fformat y data: xls, tiff

Meddalwedd ofynnol: Excel and Gwyddion (free software -> gwyddion.net)

Amcangyfrif o gyfanswm maint storio'r set ddata: Llai na 100 megabeit

Nifer y ffeiliau yn y set ddata: 4

DOI : 10.17035/d.2017.0031699446

DOI URL: http://doi.org/10.17035/d.2017.0031699446


Disgrifiad
This is the complete data set for a study, which aimed to increase the speed of the AFM tip-based nanomachining process at the interface between the tool and the workpiece. It comprises a number of related data sub-sets as
follows:

1) Measured amplitude of the reciprocating motions of the piezoelectric actuator utilised (model NAC2402-H2.3 from Noliac, Denmark) as a function of the driving frequency.

2) AFM scanned data of three machined grooves with different frequencies: 10 Hz, 10 kHz, and 40 kHz for a stage velocity of 100 μm/s.

3) Further Profile data of the cross-sections extracted from the three grooves mentioned in point 2) above.


Prosiectau Cysylltiedig

Diweddarwyd y tro diwethaf ar 2019-18-12 am 09:52