Teitl: Horizontal Axis Tidal Turbine Flume Testing Data
Dyfyniad
Prickett PW, Grosvenor RI, Allmark M (2017). Horizontal Axis Tidal Turbine Flume Testing Data. Cardiff University. https://doi.org/10.17035/d.2017.0035057337
Nid yw'r data hwn ar gael ar hyn o bryd oherwydd: Bwriad i gyhoeddi canlyniadau prosiect
Hawliau Mynediad: Creative Commons Attribution 4.0 International
Dull Mynediad: I anfon cais i gael y data hwn, ebostiwch opendata@caerdydd.ac.uk
Manylion y Set Ddata
Cyhoeddwr: Cardiff University
Dyddiad (y flwyddyn) pryd y daeth y data ar gael i'r cyhoedd: 2017
Dyddiad dechrau creu'r data: 01.05.2015
Dyddiad gorffen creu'r data: 01.06.2015
Fformat y data: .txt
Meddalwedd ofynnol: None
Amcangyfrif o gyfanswm maint storio'r set ddata: Llai nag 1 gigabeit
DOI : 10.17035/d.2017.0035057337
DOI URL: http://doi.org/10.17035/d.2017.0035057337
The data provided is the result of the Flume Testing used to develop and test Condition Monitoring system and algorithms. The data is for an optimum turbine rotor set up, with blade offsets of 6 degrees. Three sets of flume experiments were conducted for flow velocities of 0.9 m/s, 1.0 m/s and 1.1 m/s. Flume data was obtained by testing for the following seven values of l: 1.5, 2.5, 3.0, 3.5, 4.0, 4.5 and 5.5. In this way parametric surface were developed which creating a characterisation of the turbine operation under a variety of operating conditions. Research results based upon these data are published at https://doi.org/10.1016/j.renene.2017.05.010
Disgrifiad
Allweddeiriau
Condition Monitoring Marine Turbine
Prosiectau Cysylltiedig
- Dynamic loadings on turbines in a tidal array (DyLoTTA) (01.07.2016 - 31.03.2020)
- The effects of realistic tidal flows on the performance and structural integrity of tidal stream turbines (01.07.2012 - 30.09.2015)