Teitl: Structural characterisation and catalytic testing data of shell-core catalysts comprising vanadia-on-haematite

Dyfyniad
Hellier P, Bowker M, Gianolio D (2017). Structural characterisation and catalytic testing data of shell-core catalysts comprising vanadia-on-haematite. Cardiff University. http://doi.org/10.17035/d.2017.0042752202


Nid yw'r data hwn ar gael ar hyn o bryd oherwydd: Bwriad i gyhoeddi canlyniadau prosiect
Dull Mynediad: I anfon cais i gael y data hwn, ebostiwch opendata@caerdydd.ac.uk

Crewyr y Set Ddata o Brifysgol Caerdydd

Manylion y Set Ddata
Cyhoeddwr: Cardiff University
Dyddiad (y flwyddyn) pryd y daeth y data ar gael i'r cyhoedd: 2017
Fformat y data: .xlsx, .xls, .txt
Amcangyfrif o gyfanswm maint storio'r set ddata: Llai nag 1 gigabeit
DOI: 10.17035/d.2017.0042752202

Disgrifiad

Catalysts designed with a shell-core motif comprising vanadia on haematite have been found to be effective catalysts for methanol selective oxidation to formaldehyde. They are of interest not solely for their abilities in this reaction, but as a means of gauging the applicability of vanadia to the shell-core motif explored previously in the Bowker group.

This dataset includes data from characterisation techniques and catalytic testing. The following characterisation methods were employed (with dataset contents/column headings detailed):


  • Raman spectroscopy - Raman shift (cm-1) and signal intensity (arbitrary units)
  • XRD - 2Theta (°) and signal intensity (arbitrary units)
  • Diffuse Reflectance Infrared Fourier Transform Spectroscopy - wavenumber (cm-1) and diffuse absorbance (arbitrary units)
  • X-ray Absorbance Spectroscopy - Energy (eV) and normalised absorption (abitrary units)
The following catalytic testing was performed:
  • Temperature Programmed Desorption - a catalyst sample was dosed with microlitre quantities of methanol at 35°C under flowing He, and then heated to 500°C at a ramp rate of 10°C/min while a mass spectrometer measured the products and emissions from the catalyst. Data include Elapsed Time (s), Sample Temperature (°C) and MS signals for relevant analytes (e.g. formaldehyde, CO2, etc.). This technique provides quick determination of shell-core segregation through the nature of products observed: formaldehyde in TPD is indicative of good segregation.
  • Pulsed Flow Reaction/Selectivity & Conversion data - a catalyst was heated from 35°C to 500°C under an O2/He atmosphere, and microlitre quantities of methanol were injected every two minutes. Data given as for TPD.

Research results based upon these data are published at https://doi.org/10.1007/s11244-017-0873-2




Prosiectau Cysylltiedig

Diweddarwyd y tro diwethaf ar 2019-02-08 am 11:02