Teitl: The specification of and testing of a Horizontal Axis Tidal Turbine Rotor Monitoring approach
Dyfyniad
Allmark MJ, Grosvenor R, Prickett P (2018). The specification of and testing of a Horizontal Axis Tidal Turbine Rotor Monitoring approach. Cardiff University. https://doi.org/10.17035/d.2018.0055962840
Hawliau Mynediad: Creative Commons Attribution 4.0 International
Dull Mynediad: I anfon cais i gael y data hwn, ebostiwch opendata@caerdydd.ac.uk
Manylion y Set Ddata
Cyhoeddwr: Cardiff University
Dyddiad (y flwyddyn) pryd y daeth y data ar gael i'r cyhoedd: 2018
Dyddiad dechrau creu'r data: 01.09.2016
Dyddiad gorffen creu'r data: 03.10.2018
Fformat y data: .mat
Meddalwedd ofynnol: MATLAB
Amcangyfrif o gyfanswm maint storio'r set ddata: Llai na 100 megabeit
DOI : 10.17035/d.2018.0055962840
DOI URL: http://doi.org/10.17035/d.2018.0055962840
DATA Set Created at Cardiff University based on research presented in the IJPHM paper, 'the specification of and testing of a horizontal axis tidal turbine rotor monitoring approach.' List of Data Files: INFORMATION on DATA FILES: CFD_Data: InititalSimsTIxxx_x: Here XXX_X is the TI for the simulation contained in the matlab workspace e.g. InitialSimsTI010_0.mat contains the simulation results for the TI = 10% simulations. CTC - Vector containing the non-dimensional torque curve for the turbine rotor being studied. SteadyStateSimulation----|-Optimum----(1 to i)|--SimInfo: Gives all the information used to create the simulation. This includes the parameters used for the model detailed in [1] and the turbine information. NOTE: 1 to i refer to the simualtion number. for cases InitialSimsTI000_5, InitialSimsTI001_0 and InitialSimsTI002_0 there are 50 cases, i.e. i = 50. For the InitialSimsTI010_0 case there are 10 cases, i.e i = 10. CMMetricsTIxxx_x: Here XXX_X is the TI for the simulation contained in the matlab workspace e.g. CMMetricsTI010_0.mat contains the condition monitoring metrics outlined in [1] for the TI = 10% simulations. NormCMData: Matrix (4 by (number of simulations x number of fault cases)) ClassificationResultsTIxx_x: For Each fault case the following variables provide the results of the testing of the trained NBCs, trained as detailed in [1]. The case in the variable title refers to the condition of the data inputted into the NBC> FluidTimeSeriesTI010_0: ct.txt TSR.txt. Research results based upon these data are published in International Journal of Prognostics and Health Management 9(2), pp. 1-15, article number: 25
Disgrifiad
CFD_DATA.mat
InitialSimsTI000_0.mat
InitialSimsTI000_5.mat
InitialSimsTI001_0.mat
InitialSimsTI002_0.mat
InitialSimsTI010_0.mat
CMMetricsTI000_5.mat
CMMetricsTI001_0.mat
CMMetricsTI002_0.mat
CMMetricsTI010_5.mat
ClassificationResultsTI000_5.mat
ClassificationResultsTI001_0.mat
ClassificationResultsTI002_0.mat
ClassificationResultsTI010_0.mat
FluidTimSeriesTI010_0.mat
Ct.txt
TSR.txt
This data set in the form of matlab structure contains data from the CFD models undertaken to produce the paramertisation data for the model detailed in the paper.
CTC - Vector containing the non-dimensional torque curve for the turbine rotor being studied.
ITSR - The Tip-Speed-Ration indexes for the above torque curve.
Steady_State_Parameters--|-Optimum----|--CFD Data : CFD TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm).
| |--Model Data: Details of the CFD model - Rotor Radius (m), Rotational Velocity (Rad/s), Mean Fluid Velocity (m/s).
|
|-Off6_5-----|--CFD Data: CFD TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm).
| |--Model Data: Details of the CFD model - Rotor Radius (m), Rotational Velocity (Rad/s), Mean Fluid Velocity (m/s).
|
|-Off9-------|--CFD Data: CFD TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm).
| |--Model Data: Details of the CFD model - Rotor Radius (m), Rotational Velocity (Rad/s), Mean Fluid Velocity (m/s).
|
|-Off12------|--CFD Data: CFD TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm).
|--Model Data: Details of the CFD model - Rotor Radius (m), Rotational Velocity (Rad/s), Mean Fluid Velocity (m/s).
ITSR - The Tip-Speed-Ration indexes for the above torque curve.
Steady_State_Parameters--|-Optimum----|--CFD Data : CFD TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm).
| |--Model Data: Details of the CFD model - Rotor Radius (m), Rotational Velocity (Rad/s), Mean Fluid Velocity (m/s).
|
|-Off6_5-----|--CFD Data: CFD TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm).
| |--Model Data: Details of the CFD model - Rotor Radius (m), Rotational Velocity (Rad/s), Mean Fluid Velocity (m/s).
|
|-Off9-------|--CFD Data: CFD TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm).
| |--Model Data: Details of the CFD model - Rotor Radius (m), Rotational Velocity (Rad/s), Mean Fluid Velocity (m/s).
|
|-Off12------|--CFD Data: CFD TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm).
|--Model Data: Details of the CFD model - Rotor Radius (m), Rotational Velocity (Rad/s), Mean Fluid Velocity (m/s).
| |--SimResults: Model TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm), FluidVelocity (m/s).
|
|-Off6_5-----(1 to i)|--SimInfo: Gives all the information used to create the simulation. This includes the parameters used for the model detailed in [1] and the turbine information.
| |--SimResults: Model TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm), FluidVelocity (m/s).
|
|-Off9-------(1 to i)|--SimInfo: - Gives all the information used to create the simulation. This includes the parameters used for the model detailed in [1] and the turbine information.
| |--SimResults: Model TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm), FluidVelocity (m/s).
|
|-Off12------(1 to i)|--SimInfo: - Gives all the information used to create the simulation. This includes the parameters used for the model detailed in [1] and the turbine information.
|--SimResults: Model TimeStamp (Seconds), Rotor Position (Degrees), Tootal Torque (Nm), Torque Contribution Blade1 (Nm), Torque Contribution Blade2 (Nm), Torque Contribution Blade3 (Nm), FluidVelocity (m/s).
The matrix contains the normalised condition monitoring metrics detailed in [1], each row contains a specific metrix i.e row 1 contains CM metric 1 (as defined in [1]). In the case of the TI000_5 to TI002_0 cases, there are 50 simulations of 4 differing rotor conditions, resulting in 200 columns.
The first 50 contain data relatig to the optimum case and so on, in the order 'Optimum', 'Off6_5', 'Off9', 'Off12'.
This data was used to train the NBCs detailed in [1].
Here XXX_X is the TI for the simulation contained in the matlab workspace e.g. ClassificationResultsTI010_0.mat contains the cNBC results for the TI = 10% simulations.
NBClabel___: The MAP classification results for the inputted data set.
NBCPosterior___: Posterior probability returned via the NBC for the inputted dataset.
nbccOSToPT___: Cost of making the classification for the inputted data.
Fluid time series generated via the process outline in Appendix A of [1]
Non-Dimensional Torque Curve, for the rotor.
Tip-Speed ratio index for the ct curve.
Allweddeiriau
Condition Monitoring Marine Turbine
Prosiectau Cysylltiedig
- Dynamic loadings on turbines in a tidal array (DyLoTTA) (01.07.2016 - 31.03.2020)
- The effects of realistic tidal flows on the performance and structural integrity of tidal stream turbines (01.07.2012 - 30.09.2015)