Teitl: Comparison between torsional spring constants of rectangular and V-shaped AFM cantilevers - dataset

Dyfyniad
Borodich FM, Al-Musawi RS, Brousseau E, et al. (2019). Comparison between torsional spring constants of rectangular and V-shaped AFM cantilevers - dataset. Cardiff University. http://doi.org/10.17035/d.2018.0065547679


Nid yw'r data hwn ar gael ar hyn o bryd oherwydd: Bwriad i gyhoeddi canlyniadau prosiect
Dull Mynediad: I anfon cais i gael y data hwn, ebostiwch opendata@caerdydd.ac.uk

Manylion y Set Ddata
Cyhoeddwr: Cardiff University
Dyddiad (y flwyddyn) pryd y daeth y data ar gael i'r cyhoedd: 2019
Fformat y data: .xls, .cae
Meddalwedd ofynnol: Microsoft Excel
Abaqus

Amcangyfrif o gyfanswm maint storio'r set ddata: Llai na 100 megabeit
Nifer y ffeiliau yn y set ddata: 8
DOI: 10.17035/d.2018.0065547679

Disgrifiad

This is the data set for a study on the comparison between torsional spring constants of rectangular and V-shaped AFM cantilevers. It comprises a number of related data sub-sets as follows:

1)        Displacement and force data recorded experimentally for three different V-shaped cantilever models loaded with a normal force. These data were used to plot the graph shown in Figure 8 in the manuscript.

2)        Displacement data simulated using Finite Elements (FE) models of pyramidal and  prismatic tips attached to a rectangular cantilever and loaded with a lateral force.

3)        Displacement and force data recorded experimentally for three different V-shaped cantilever models and the equivalent three rectangular cantilevers models. In all experiments, the cantilevers were loaded with a lateral force. These data were used to plot the three graphs shown in Figure 11 in the manuscript.

4)        Three Finite Element (FE) models of rectangular cantilevers when loaded with a normal force. These models were prepared in accordance with the procedure described in section 3.2 in the manuscript. The theoretical values of the normal spring constant obtained with these FE models are presented in table 2 in the manuscript.

5)        Finite Element models of two sets of equivalent rectangular and V-shaped cantilevers (i.e. four models in total) when loaded with a lateral force. These models were prepared in accordance with the dimensions of the experimental samples, which are given in the manuscript.


Prosiectau Cysylltiedig

Diweddarwyd y tro diwethaf ar 2020-08-07 am 15:26