Teitl: Fractional frequency shift data for a additive manufactured cylindrical microwave resonant cavity between 6 - 450 K, for the assessment of thermal expansion coefficient


Dyfyniad
Gumbleton R, Cuenca JA, Klemencic GM, et al. (2019). Fractional frequency shift data for a additive manufactured cylindrical microwave resonant cavity between 6 - 450 K, for the assessment of thermal expansion coefficient. Cardiff University. http://doi.org/10.17035/d.2019.0075533614



Nid yw'r data hwn ar gael ar hyn o bryd oherwydd: Bwriad i gyhoeddi canlyniadau prosiect

Dull Mynediad: I anfon cais i gael y data hwn, ebostiwch opendata@caerdydd.ac.uk


Manylion y Set Ddata

Cyhoeddwr: Cardiff University

Dyddiad (y flwyddyn) pryd y daeth y data ar gael i'r cyhoedd: 2019

Dyddiad dechrau creu'r data: 12.12.2018

Dyddiad gorffen creu'r data: 22.02.2019

Fformat y data: .xlsx, .tdms

Meddalwedd ofynnol: .tdms file requires a national Instrument LabVIEW tdms plug in for excel.

Amcangyfrif o gyfanswm maint storio'r set ddata: Llai na 100 megabeit

Nifer y ffeiliau yn y set ddata: 3

DOI : 10.17035/d.2019.0075533614

DOI URL: http://doi.org/10.17035/d.2019.0075533614


Disgrifiad

The relatively poor microwave electrical conductivity of additive manufactured AlSi10Mg results in many applications relying on the use of post processing in the form of silver plating. For space & satellite application, extreme thermal cycling can cause expansion of the component and the silver plating at different rates. In addition to this, extreme thermal expansion of the component can lead to changes in operating frequency. Therefore, assessment of the thermal properties of AlSi10Mg is of particular importance for it utilisation in practical applications.

This dataset constists of an overn ramp (300-450K) and a fridge ramp (300-6K). cooling_6-300K.exl contains three colums (Temperature in Kelvin, Frequency in Hz and Quality Factor) for the fridge ramp. heating.tdms is the data for the oven ramp. The file contains data tabs for five resonant frequency modes (Mode 0= TM010, Mode 1= TM110, Mode 2= TM210, Mode 3=TM020 and Mode 4=TM310) The data used in publication was Mode 0, Mode 2 and Mode 4. The data for each mode consits of two temperature measurments in celsius, time in seconds, resonant frequency in Hz, bandwidth in Hz and insersion loss in dB.

Research results based upon these data are published at https://doi.org/10.1016/j.addma.2019.100841


Allweddeiriau

Microwave Material Measurements, Thermal Expansion

Prosiectau Cysylltiedig

Diweddarwyd y tro diwethaf ar 2020-23-11 am 15:07