Projects (109)
Cardiff University Schools involved in this Project
Adhesive interactions between particles and surface at micro/nanometer scales (01/10/2006 - 31/01/2010)
- Borodich, Feodor
Assessment of the effects of building factor and material defects on transformer core losses (01/10/2006 - 30/12/2011)
- Hall, Jeremy
Adaptive models of human motion (01/04/2007 - 31/03/2010)
- Hicks, Yulia
A programme of computational and experimental research into the relationship between concrete cracking, durability, bond and rib profile (01/10/2007 - 01/10/2010)
- Lark, Robert
Advanced vocational European safety training for SME's with automated systems (02/11/2007 - 31/12/2009)
- Setchi, Rossi
Autonomous regional active network management system (17/03/2008 - 30/06/2010)
- Jenkins, Nicholas
Application of the SBR2 algorithm to various passive sonar applications (01/03/2009 - 28/02/2011)
- Mcwhirter, John
ARROW - Aerospace Research Organisation Wales (01/06/2009 - 28/02/2010)
- Featherston, Carol
A lightweight structural health monitoring system (01/07/2009 - 30/09/2012)
- Holford, KAREN
Assessment of fatigue failure (15/07/2009 - 12/08/2009)
- Evans, Samuel
A coupled thermo-hygro-mechanical finite element model for concrete structures (25/03/2010 - 01/01/2014)
- Jefferson, Anthony
Advanced discretisation strategies for "atomistic" nano CMOS simulation feasibility study (26/04/2010 - 25/04/2011)
- Bordas, Stephane
Analysis of loads on steering column for Furore kit car (30/04/2010 - 31/05/2010)
- Evans, Samuel
Analysis of ultrafine particulate emissions from the transport sector (01/10/2010 - 31/03/2014)
- Bowen, Philip
An investigation into the chemical weathering characteristics of mine wastes (01/10/2010 - 31/03/2012)
- Sapsford, Devin
Assessing the impact of biofouling on the hydraulic efficiency of pipelines (01/10/2010 - 31/03/2014)
- Cowle, Matthew
Advanced discretisation strategies for "atomistic" nano CMOS simulation (01/01/2011 - 31/03/2011)
- Bordas, Stephane
ACCELERATED METALLURGY - Accelerated discovery of alloy formulation using combinatorial projects (01/03/2011 - 14/06/2016)
- Gao, Gao Min
Assessment of hip replacement surgery (01/04/2011 - 30/04/2011)
- Evans, Samuel
Assessment Centre to support the evaluation pathways for medical technologies (01/05/2011 - 31/03/2025)
- Evans, Samuel
Access to Xband measurement system (Engin) (16/06/2011 - 31/08/2011)
- Tasker, Paul
An investigation of the effect of water quality on iron corrosion in mains distribution systems (01/08/2011 - 31/08/2011)
- Wilson, Catherine
Analysis of electrical steel laminations (30/08/2011 - 30/03/2013)
- Hall, Jeremy
Assessment and Review of Stress Modelling (01/10/2011 - 30/04/2012)
- Melikhov, Yevgen
-
- Holford, KAREN
AQUALITY Online industrial water quality analysis system for rapid and accurate detection of pathogens (01/12/2011 - 30/11/2013)
- Barrow, David
Assessment of airport snow and ice management systems (14/02/2012 - 13/03/2012)
- Cleall, Peter
An assessment of the water quality impacts of pollutant discharges in the Clyne Valley and proposed remediation options (20/02/2012 - 20/07/2012)
- Sapsford, Devin
An advanced modelling approach for micro EDM wear analysis (21/03/2012 - 03/05/2013)
- Bigot, Samuel
Analysis of coating defects on grain oriented electrical steel samples supplied by sponsor with report to identify where possible likely causes of defects. (01/04/2012 - 30/06/2012)
- Hall, Jeremy
Agent-based controllers for electric vehicles and microgenerators (11/06/2012 - 30/04/2013)
- Cipcigan, Liana
An isogeometric boundary element method for rapid analysis of prototype designs (15/06/2012 - 15/06/2014)
Application of DC circuit-breakers in DC grids (01/07/2012 - 30/09/2017)
- Liang, Jun
A study into the effects of radiotherapy on pacemakers and other implanted electronics (01/10/2012 - 30/09/2015)
- Perks, Richard
Analyses of MMIC behaviour (01/05/2013 - 14/09/2013)
- Tasker, Paul
Advanced tooth gear contract modelling (01/10/2013 - 30/09/2016)
- Evans, Henry
Advance uptake of the "Cardiff Model" (01/10/2013 - 30/09/2014)
- Tasker, Paul
A novel medical device for early detection and treatment of traumatic brain injury based on advanced qEEGand HD-TES to prevent major health impact and specially for use in emergency and telemedicine (EMEREEG) (01/10/2013 - 30/09/2015)
- Setchi, Rossi
Advancing the design of millimetre-wave technology and MMICs using novel behavioural modeling techniques and active load-pull concepts (01/09/2014 - 30/11/2016)
- Tasker, Paul
An investigation into the environmental impacts of large diameter pipes (01/10/2014 - 31/01/2015)
- Babatunde, Akintunde
A novel magnetostrictive curvature sensor employing flexible, figure-of-eight sensing coils (01/10/2014 - 30/09/2017)
Audit UU regional coastal model - Part B - Solway Firth (01/10/2014 - 29/02/2016)
- Falconer, Roger
An adaptive multiscale method for sandwich-structured panels (03/11/2014 - 31/12/2017)
- Kerfriden, Pierre
Assessment of acoustic emission technology in thick walled pipe structures (05/01/2015 - 30/09/2015)
- Pullin, Rhys
Accelerated weathering of mine wastes - Sahavaara HCT (01/02/2015 - 30/09/2015)
- Sapsford, Devin
Adaptive assistive rehabilitative technology: Beyond the clinic (AART-BC) (01/04/2015 - 30/09/2018)
- Holt, Cathy
Advanced gas turbine cycles for high efficiency and sustainable future conventional generation (01/06/2015 - 30/11/2018)
- Bowen, Philip
Active sensing of exhaust particulates using a smart vertical nanowire array (01/07/2015 - 30/06/2018)
- Bowen, Philip
Advanced Sustainable Manufacturing Technologies 2020 (01/07/2015 - 31/12/2022)
- Setchi, Rossi
Advanced personalised 3D dosimetry for a clinical trial in peptide receptor radionuclide therapy (01/10/2015 - 30/09/2018)
- Spezi, Emiliano
Addressing the UK energy balancing challenge: integrated gas and electricity network technology options (01/03/2016 - 31/12/2016)
- Jenkins, Nicholas
A novel intelligent sensing system for composite blades to perceive the surrounding conditions (31/03/2016 - 30/03/2018)
- Wu, Zhangming
Angle DC project (01/08/2016 - 31/12/2025)
- Liang, Jun
Acousto-ultrasonic testing of resistance of armour (A-ULTRA) (01/09/2016 - 01/11/2017)
- Pullin, Rhys
APU alternative fuels emissions testing (01/09/2016 - 31/05/2017)
- Crayford, Andrew
Automatic generation of BIM models by semantisation of building data, an application in the energy retrofitting domain (01/10/2016 - 30/09/2019)
- Rezgui, Yacine
A lab-on-a-chip for characterising and sorting cancer cells (01/11/2016 - 31/01/2018)
- Yang, Chris
Analysis of lumbar spine rotation (01/11/2016 - 31/05/2017)
- Yang, Chris
An ultrasonic point-of-care sensor for circulating tumour cell detection (01/11/2016 - 31/01/2017)
- Yang, Chris
Alternatives to SF6 as an insulation medium for distribution equipment (01/02/2017 - 31/10/2017)
- Lugg-Widger, Phillip
Advanced sustainable manufacturing technologies 2020 - East (01/10/2017 - 31/12/2022)
- Setchi, Rossi
Advancing radiotherapy treatments with accurate planning and delivery of proton therapy (01/10/2017 - 10/02/2023)
- Spezi, Emiliano
A feasibility study for the development of GaN-based high frequency RF devices (01/10/2017 - 30/11/2018)
- Tasker, Paul
Advanced broadband reconfigurable amplifiers concepts using novel circuit architectures and operating modes - Phase 1 (01/01/2018 - 31/12/2018)
- Quaglia, Roberto
ATMX P23 iCore RBIP Cardiff nvpm test measurement equipment and support (01/01/2018 - 30/11/2019)
- Crayford, Andrew
An acoustic chip for separating circulating tumour biomarkers for cancer diagnosis and treatment monitoring (01/02/2018 - 31/01/2019)
- Yang, Chris
An innovative product produced by combining ALM and laser ablation of microstructures (01/03/2018 - 31/03/2019)
- Bigot, Samuel
Avenues of commercialisation for nano and micro technologies (ACNM) (01/05/2018 - 31/07/2021)
- Elgaid, Khaled
A novel complex variable meshless method for the efficient optimal design of damage tolerant composite aircraft structures (01/09/2018 - 31/08/2020)
- Wu, Zhangming
Automated fatigue crack detection for structural health monitoring of metallic aerospace structures (03/09/2018 - 01/03/2021)
- Purcell, Frederick
Additive manufacturing using metal pilot Line (01/10/2018 - 31/03/2023)
- Bigot, Samuel
ASPIRE: Al solutions for personalised radiotherapy (01/10/2018 - 30/09/2020)
- Spezi, Emiliano
Artificial cells with distributed cores to decipher protein function (01/01/2019 - 31/07/2023)
- Barrow, David
Artificial cells with distributed cores to decipher protein function (01/01/2019 - 31/07/2023)
- Barrow, David
Assessing aViation emission Impact on local Air quality at airports: TOwards Regulation (01/06/2019 - 31/05/2023)
- Crayford, Andrew
Assessing temporal and spatial impacts of decarbonising heat and transport on electricity networks (01/08/2019 - 30/05/2023)
- Qadrdan, Meysam
Assess the impact of the pollution on the operation of the insulator, potential future risks to operation through further contamination, and also mitigation action for long term operation of these insulators in the present environment (09/12/2019 - 31/12/2019)
- Albano, Maurizio
Acoustic approaches for digital asset management - Phase 1 (01/01/2020 - 31/12/2020)
- Pullin, Rhys
Active robot learning for subtractive, formative, and additive manipulations of granular and viscous materials (02/03/2020 - 08/03/2022)
- Ji, Ze
Active reinforcement learning for enhanced GNSS localisation and fail-safe autonomous navigation (01/07/2020 - 30/06/2024)
- Ji, Ze
AFM-based nano-machinery, developing and validating a novel modelling approach for the effective process implementation in nanotechnology applications (01/09/2020 - 28/06/2024)
- Brousseau, Emmanuel
AFM-based nano-machining: Developing and validating a novel modelling approach for effective process implementation in nanotechnology applications (01/09/2020 - 28/06/2024)
- Brousseau, Emmanuel
A data-driven approach for optimal distribution network operation with rapid charging infrastructure and large-scale battery storrage (01/11/2020 - 31/03/2022)
- Cipcigan, Liana
Analysis (01/11/2020 - 28/02/2021)
- Syrop, Deborah
A BioEngineering approach for the SAFE design and fitting of Respiratory Protective Equipment (BE-SAFE RPE) (28/12/2020 - 27/06/2022)
- Evans, Samuel
Acoustic approaches for digital asset management test and report (01/01/2021 - 30/09/2021)
- Pullin, Rhys
Advice on Carbon Sequestration in South Wales (01/01/2021 - 31/12/2021)
- Thomas, Hywel
A decision making tool for operation optimization of campus multi energy systems (01/03/2021 - 31/12/2021)
- Abeysinghe Herath Mudiyanselage, Sathsara
ASPIRE - Accelerated Supergene Processes in Repository Engineering (01/03/2021 - 30/09/2024)
- Sapsford, Devin
Ammonia and hydrogen use for industrial heat and power generation (01/07/2021 - 30/06/2023)
- Bowen, Philip
A PDK for quantum photonics (29/07/2021 - 31/07/2023)
- Bennett, Anthony
Assessing The Risks To Freshwater Ecosystems From Water-Soluble Polymers (01/10/2021 - 29/09/2025)
- Tarring, Eve
Acoustic Source Identification with AI and Digital Twins (01/11/2021 - 31/03/2023)
- Kundu, Abhishek
Architectural microstructure-modification mechanisms and the microstructure-performance optimization for SLM Aluminium matrix composites (10/03/2022 - 09/03/2024)
- Setchi, Rossi
Amburn Phase 1 (28/03/2022 - 18/11/2022)
- Valera Medina, Agustin
Accelerating the ICE-to-EV transition (01/05/2022 - 31/10/2022)
- Cipcigan, Liana
Automated compliance checks for construction, renovation or demolition works (01/09/2022 - 31/08/2025)
- Beach, Tom
Active perception and learning for robust localisation and autonomous navigation (05/09/2022 - 04/09/2024)
- Ji, Ze
-
- Liang, Jun
Analytical phantom for quantitative medical imaging and standardised radiomics analysis (30/11/2022 - 31/03/2024)
- Spezi, Emiliano