Projects (109)
Cardiff University Schools involved in this Project
Adhesive interactions between particles and surface at micro/nanometer scales (01/10/2006 - 31/01/2010)
- Borodich, Feodor
Assessment of the effects of building factor and material defects on transformer core losses (01/10/2006 - 30/12/2011)
- Hall, Jeremy
Adaptive models of human motion (01/04/2007 - 31/03/2010)
- Hicks, Yulia
A programme of computational and experimental research into the relationship between concrete cracking, durability, bond and rib profile (01/10/2007 - 01/10/2010)
- Lark, Robert
Advanced vocational European safety training for SME's with automated systems (02/11/2007 - 31/12/2009)
- Setchi, Rossi
Autonomous regional active network management system (17/03/2008 - 30/06/2010)
- Jenkins, Nicholas
Application of the SBR2 algorithm to various passive sonar applications (01/03/2009 - 28/02/2011)
- Mcwhirter, John
ARROW - Aerospace Research Organisation Wales (01/06/2009 - 28/02/2010)
- Featherston, Carol
A lightweight structural health monitoring system (01/07/2009 - 30/09/2012)
- Holford, KAREN
Assessment of fatigue failure (15/07/2009 - 12/08/2009)
- Evans, Samuel
A coupled thermo-hygro-mechanical finite element model for concrete structures (25/03/2010 - 01/01/2014)
- Jefferson, Anthony
Advanced discretisation strategies for "atomistic" nano CMOS simulation feasibility study (26/04/2010 - 25/04/2011)
- Bordas, Stephane
Analysis of loads on steering column for Furore kit car (30/04/2010 - 31/05/2010)
- Evans, Samuel
Analysis of ultrafine particulate emissions from the transport sector (01/10/2010 - 31/03/2014)
- Bowen, Philip
An investigation into the chemical weathering characteristics of mine wastes (01/10/2010 - 31/03/2012)
- Sapsford, Devin
Assessing the impact of biofouling on the hydraulic efficiency of pipelines (01/10/2010 - 31/03/2014)
- Cowle, Matthew
Advanced discretisation strategies for "atomistic" nano CMOS simulation (01/01/2011 - 31/03/2011)
- Bordas, Stephane
ACCELERATED METALLURGY - Accelerated discovery of alloy formulation using combinatorial projects (01/03/2011 - 14/06/2016)
- Gao, Gao Min
Assessment of hip replacement surgery (01/04/2011 - 30/04/2011)
- Evans, Samuel
Assessment Centre to support the evaluation pathways for medical technologies (01/05/2011 - 31/03/2025)
- Evans, Samuel
Access to Xband measurement system (Engin) (16/06/2011 - 31/08/2011)
- Tasker, Paul
An investigation of the effect of water quality on iron corrosion in mains distribution systems (01/08/2011 - 31/08/2011)
- Wilson, Catherine
Analysis of electrical steel laminations (30/08/2011 - 30/03/2013)
- Hall, Jeremy
Assessment and Review of Stress Modelling (01/10/2011 - 30/04/2012)
- Melikhov, Yevgen
-
- Holford, KAREN
AQUALITY Online industrial water quality analysis system for rapid and accurate detection of pathogens (01/12/2011 - 30/11/2013)
- Barrow, David
Assessment of airport snow and ice management systems (14/02/2012 - 13/03/2012)
- Cleall, Peter
An assessment of the water quality impacts of pollutant discharges in the Clyne Valley and proposed remediation options (20/02/2012 - 20/07/2012)
- Sapsford, Devin
An advanced modelling approach for micro EDM wear analysis (21/03/2012 - 03/05/2013)
- Bigot, Samuel
Analysis of coating defects on grain oriented electrical steel samples supplied by sponsor with report to identify where possible likely causes of defects. (01/04/2012 - 30/06/2012)
- Hall, Jeremy
Agent-based controllers for electric vehicles and microgenerators (11/06/2012 - 30/04/2013)
- Cipcigan, Liana
An isogeometric boundary element method for rapid analysis of prototype designs (15/06/2012 - 15/06/2014)
Application of DC circuit-breakers in DC grids (01/07/2012 - 30/09/2017)
- Liang, Jun
A study into the effects of radiotherapy on pacemakers and other implanted electronics (01/10/2012 - 30/09/2015)
- Perks, Richard
Analyses of MMIC behaviour (01/05/2013 - 14/09/2013)
- Tasker, Paul
Advanced tooth gear contract modelling (01/10/2013 - 30/09/2016)
- Evans, Henry
Advance uptake of the "Cardiff Model" (01/10/2013 - 30/09/2014)
- Tasker, Paul
A novel medical device for early detection and treatment of traumatic brain injury based on advanced qEEGand HD-TES to prevent major health impact and specially for use in emergency and telemedicine (EMEREEG) (01/10/2013 - 30/09/2015)
- Setchi, Rossi
Advancing the design of millimetre-wave technology and MMICs using novel behavioural modeling techniques and active load-pull concepts (01/09/2014 - 30/11/2016)
- Tasker, Paul
An investigation into the environmental impacts of large diameter pipes (01/10/2014 - 31/01/2015)
- Babatunde, Akintunde
A novel magnetostrictive curvature sensor employing flexible, figure-of-eight sensing coils (01/10/2014 - 30/09/2017)
Audit UU regional coastal model - Part B - Solway Firth (01/10/2014 - 29/02/2016)
- Falconer, Roger
An adaptive multiscale method for sandwich-structured panels (03/11/2014 - 31/12/2017)
- Kerfriden, Pierre
Assessment of acoustic emission technology in thick walled pipe structures (05/01/2015 - 30/09/2015)
- Pullin, Rhys
Accelerated weathering of mine wastes - Sahavaara HCT (01/02/2015 - 30/09/2015)
- Sapsford, Devin
Adaptive assistive rehabilitative technology: Beyond the clinic (AART-BC) (01/04/2015 - 30/09/2018)
- Holt, Cathy
Advanced gas turbine cycles for high efficiency and sustainable future conventional generation (01/06/2015 - 30/11/2018)
- Bowen, Philip
Active sensing of exhaust particulates using a smart vertical nanowire array (01/07/2015 - 30/06/2018)
- Bowen, Philip
Advanced Sustainable Manufacturing Technologies 2020 (01/07/2015 - 31/12/2022)
- Setchi, Rossi
Advanced personalised 3D dosimetry for a clinical trial in peptide receptor radionuclide therapy (01/10/2015 - 30/09/2018)
- Spezi, Emiliano