Prosiectau (1429)
Cardiff University Schools involved in this Project
An adaptive multiscale method for sandwich-structured panels (03.11.2014 - 31.12.2017)
- Kerfriden, Pierre
An advanced modelling approach for micro EDM wear analysis (21.03.2012 - 03.05.2013)
- Bigot, Samuel
Analyses of MMIC behaviour (01.05.2013 - 14.09.2013)
- Tasker, Paul
Analysis (01.11.2020 - 28.02.2021)
- Syrop, Deborah
Analysis of coating defects on grain oriented electrical steel samples supplied by sponsor with report to identify where possible likely causes of defects. (01.04.2012 - 30.06.2012)
- Hall, Jeremy
Analysis of electrical steel laminations (30.08.2011 - 30.03.2013)
- Hall, Jeremy
Analysis of loads on steering column for Furore kit car (30.04.2010 - 31.05.2010)
- Evans, Samuel
Analysis of lumbar spine rotation (01.11.2016 - 31.05.2017)
- Yang, Chris
Analysis of ultrafine particulate emissions from the transport sector (01.10.2010 - 31.03.2014)
- Bowen, Philip
Analytical phantom for quantitative medical imaging and standardised radiomics analysis (30.11.2022 - 31.03.2024)
- Spezi, Emiliano
An assessment of the water quality impacts of pollutant discharges in the Clyne Valley and proposed remediation options (20.02.2012 - 20.07.2012)
- Sapsford, Devin
Angle DC project (01.08.2016 - 31.12.2025)
- Liang, Jun
An innovative product produced by combining ALM and laser ablation of microstructures (01.03.2018 - 31.03.2019)
- Bigot, Samuel
An investigation into the chemical weathering characteristics of mine wastes (01.10.2010 - 31.03.2012)
- Sapsford, Devin
An investigation into the environmental impacts of large diameter pipes (01.10.2014 - 31.01.2015)
- Babatunde, Akintunde
An investigation of the effect of water quality on iron corrosion in mains distribution systems (01.08.2011 - 31.08.2011)
- Wilson, Catherine
An isogeometric boundary element method for rapid analysis of prototype designs (15.06.2012 - 15.06.2014)
A novel complex variable meshless method for the efficient optimal design of damage tolerant composite aircraft structures (01.09.2018 - 31.08.2020)
- Wu, Zhangming
A novel intelligent sensing system for composite blades to perceive the surrounding conditions (31.03.2016 - 30.03.2018)
- Wu, Zhangming
A novel medical device for early detection and treatment of traumatic brain injury based on advanced qEEGand HD-TES to prevent major health impact and specially for use in emergency and telemedicine (EMEREEG) (01.10.2013 - 30.09.2015)
- Setchi, Rossi
An ultrasonic point-of-care sensor for circulating tumour cell detection (01.11.2016 - 31.01.2017)
- Yang, Chris
A PDK for quantum photonics (29.07.2021 - 31.07.2023)
- Bennett, Anthony
Application of DC circuit-breakers in DC grids (01.07.2012 - 30.09.2017)
- Liang, Jun
Application of the SBR2 algorithm to various passive sonar applications (01.03.2009 - 28.02.2011)
- Mcwhirter, John
A programme of computational and experimental research into the relationship between concrete cracking, durability, bond and rib profile (01.10.2007 - 01.10.2010)
- Lark, Robert
APU alternative fuels emissions testing (01.09.2016 - 31.05.2017)
- Crayford, Andrew
AQUALITY Online industrial water quality analysis system for rapid and accurate detection of pathogens (01.12.2011 - 30.11.2013)
- Barrow, David
Architectural microstructure-modification mechanisms and the microstructure-performance optimization for SLM Aluminium matrix composites (10.03.2022 - 09.03.2024)
- Setchi, Rossi
ARROW - Aerospace Research Organisation Wales (01.06.2009 - 28.02.2010)
- Featherston, Carol
Artificial cells with distributed cores to decipher protein function (01.01.2019 - 31.07.2023)
- Barrow, David
Artificial cells with distributed cores to decipher protein function (01.01.2019 - 31.07.2023)
- Barrow, David
ASPIRE - Accelerated Supergene Processes in Repository Engineering (01.03.2021 - 30.09.2024)
- Sapsford, Devin
ASPIRE: Al solutions for personalised radiotherapy (01.10.2018 - 30.09.2020)
- Spezi, Emiliano
Assessing aViation emission Impact on local Air quality at airports: TOwards Regulation (01.06.2019 - 31.05.2023)
- Crayford, Andrew
Assessing temporal and spatial impacts of decarbonising heat and transport on electricity networks (01.08.2019 - 30.05.2023)
- Qadrdan, Meysam
Assessment and Review of Stress Modelling (01.10.2011 - 30.04.2012)
- Melikhov, Yevgen
Assessment Centre to support the evaluation pathways for medical technologies (01.05.2011 - 31.03.2025)
- Evans, Samuel
Assessment of acoustic emission technology in thick walled pipe structures (05.01.2015 - 30.09.2015)
- Pullin, Rhys
Assessment of airport snow and ice management systems (14.02.2012 - 13.03.2012)
- Cleall, Peter
Assessment of fatigue failure (15.07.2009 - 12.08.2009)
- Evans, Samuel
Assessment of hip replacement surgery (01.04.2011 - 30.04.2011)
- Evans, Samuel
Assessment of the effects of building factor and material defects on transformer core losses (01.10.2006 - 30.12.2011)
- Hall, Jeremy
Assess the impact of the pollution on the operation of the insulator, potential future risks to operation through further contamination, and also mitigation action for long term operation of these insulators in the present environment (09.12.2019 - 31.12.2019)
- Albano, Maurizio
A study into the effects of radiotherapy on pacemakers and other implanted electronics (01.10.2012 - 30.09.2015)
- Perks, Richard
ATMX P23 iCore RBIP Cardiff nvpm test measurement equipment and support (01.01.2018 - 30.11.2019)
- Crayford, Andrew
Audit UU regional coastal model - Part B - Solway Firth (01.10.2014 - 29.02.2016)
- Falconer, Roger
A user-friendly analysis tool for the accelerated adoption of Balanced Heating and Cooling Networks (BHCNs) (13.03.2023 - 31.03.2024)
- Qadrdan, Meysam
Automated compliance checks for construction, renovation or demolition works (01.09.2022 - 31.08.2025)
- Beach, Tom
Automatic generation of BIM models by semantisation of building data, an application in the energy retrofitting domain (01.10.2016 - 30.09.2019)
- Rezgui, Yacine
Autonomous regional active network management system (17.03.2008 - 30.06.2010)
- Jenkins, Nicholas
Avenues of commercialisation for nano and micro technologies (ACNM) (01.05.2018 - 31.07.2021)
- Elgaid, Khaled
Bangladesh 2050 calculator (01.01.2013 - 31.03.2017)
- Mourshed, Monjur
Barriers to recycling - advisor/reviewer of data generated (14.01.2011 - 14.01.2011)
Baseband linearisation schemes for high efficiency power amplifiers (01.01.2015 - 31.12.2017)
- Tasker, Paul
Bed friction in rough-bed free-surface flows: A theoretical framework roughness regimes and quantification (01.06.2014 - 31.08.2018)
- Stoesser, Thorsten
Beyond state-of-art technologies for power AC corridors and multi-terminal HVDC systems (Best Paths) (01.10.2014 - 30.09.2018)
- Jenkins, Nicholas
B/H Testing for magnetic fingerprinting of samples (01.10.2021 - 31.12.2021)
- Anderson, Philip
BIM4VET (01.09.2015 - 28.02.2018)
- Li, Haijiang
BIM-based environmental regulatory compliance checking: An application with BREEAM and code for sustainable homes (01.04.2012 - 31.03.2015)
- Rezgui, Yacine
BIM-based EU-wide standardized qualification framework for achieving energy efficiency training (01.09.2017 - 29.02.2020)
- Rezgui, Yacine
BIM based regulatory compliance design environment (01.05.2012 - 30.04.2014)
- Rezgui, Yacine
BIM governance across the lifecycle and supply chains of a highway project (01.10.2015 - 30.09.2018)
- Lark, Robert
BIM governance framework supporting multi-facet project and organization quality assurance (01.10.2017 - 30.04.2023)
- Li, Haijiang
Bioactuation in soft robotics (25.05.2018 - 24.06.2018)
- Gei, Massimiliano
Bio-HhOST: Next Generation 3D Tissue Models: Bio-Hybrid Hierarchical Organoid-Synthetic Tissues (Bio-HhOST) Comprised of Live and Artificial Cells (01.02.2024 - 31.01.2027)
- Barrow, David
Biological effects of pulsed RF fields on Luminophores (01.12.2014 - 14.06.2016)
- Porch, Adrian
Biological reactors as replacement to activated carbon filters for the treatment of contaminated groundwater (01.01.2011 - 31.08.2013)
- Harbottle, Michael
Biomechanical analysis of dual bridge plating (01.06.2014 - 15.02.2015)
- Theobald, Peter
Biomechanical impact testing on three hip pad designs according to Z235 Hip Protector Standard (01.08.2020 - 31.10.2020)
- Keenan, Bethany
Biomolecular mechanisms underlying cellular responses to non-thermal electromagnetic fields: Getting to the "heart" of the matter (01.12.2016 - 10.02.2022)
- Williams, Catrin
BMT Coercimeter Development (26.01.2017 - 30.06.2017)
- Anderson, Philip
Bone pull-out strength tests (14.01.2019 - 31.01.2019)
- Theobald, Peter
BP acetic acid burning (01.02.2012 - 31.08.2013)
- Bowen, Philip
Bridgend Smart Systems and Heat - Consumer Engagement and Insights (13.03.2017 - 31.03.2018)
- Thomas, Hywel
Bridgend Smart Systems and Heat - Technical Development (15.01.2017 - 31.03.2018)
- Thomas, Hywel
Bridging the gaps (01.04.2012 - 31.03.2013)
- Featherston, Carol
Bringing flexibility provided by multi energy carrier integration to a new MAGNITUDE (01.10.2017 - 31.05.2021)
- Wu, Jianzhong
Broadband amplifier for operation in the presence of mismatched loads (01.02.2021 - 28.02.2022)
- Quaglia, Roberto
Broadband Amplifiers with Multiple Operation Modes (15.01.2022 - 15.12.2022)
- Quaglia, Roberto
Broadband amplifier with flat power and efficiency response (01.12.2019 - 31.08.2021)
- Cripps, Steve
Broadband Doherty PA key techniques (18.09.2014 - 30.09.2016)
- Benedikt, Johannes
Broadband high efficiency high power amplifiers (01.10.2017 - 31.03.2021)
- Cripps, Steve
Broadband microwave power amplifiers in GaN technology with high “linear efficiency (01.12.2022 - 30.11.2025)
- Quaglia, Roberto
BST Capacitor characterisation (10.12.2012 - 09.01.2013)
- Lees, Jonny
Building and district thermal retrofit and management solutions (01.09.2016 - 28.02.2020)
- Rezgui, Yacine
Building capacity for collaboration equipment (22.12.2022 - 31.03.2023)
- Lees, Jonny
Building capacity for collaboration equipment - SAFTestbed (22.11.2022 - 31.03.2023)
- Navaratne, Rukshan
Building Collaborative Sino-British Urban Flooding and Drainage Modelling Communities (31.03.2022 - 30.03.2024)
- Xie, Zhihua
By-product analysis of CF3I gas mixtures as an alternative interrupting medium (01.07.2015 - 31.03.2016)
- Haddad, Manu
Callibration of oilmist detectors (01.08.2011 - 31.12.2011)
- Bowen, Philip
CAMM: Canister cover and launch tube impact tests (01.08.2015 - 30.11.2015)
- Pullin, Rhys
CAMM canister cover impact tests (01.11.2012 - 31.01.2013)
- Pullin, Rhys
CAMM Canister Cover Impact Tests (29.09.2014 - 28.01.2015)
- Pullin, Rhys
CAMM canister cover impact tests II (25.05.2015 - 24.09.2015)
- Pullin, Rhys
CAMM-ER launch tube impact tests (10.04.2018 - 10.06.2018)
- Eaton, Mark
Can providing 3D printing be used to enhance cardiopulmonary resuscitation techniques? (01.12.2013 - 31.08.2014)
- Theobald, Peter
Capacity Building (01.03.2009 - 31.07.2012)
- Thomas, Hywel
Capillary flow of autogenic healing agents in discrete cracks in cementitious materials (05.11.2012 - 04.02.2014)
- Gardner, Diane
Capital for great technologies grid-scale energy storage call (01.07.2013 - 28.02.2015)
- Jenkins, Nicholas
Capture: Regulating CaCO3 polymorphism to unlock the potential of carbonated steel slag as a cement replacement (01.04.2024 - 31.03.2025)
- Jin, Fei