Projects (121)
Cardiff University Schools involved in this Project
D-COM: Digitisation of requirements, regulations and compliance checking processes in the built environment (01/07/2018 - 31/12/2018)
- Beach, Tom
Developing radiomics as an imaging biomarker in high grade glioma (01/07/2018 - 26/09/2021)
- Spezi, Emiliano
Design and construction of the Meritt coil system (21/06/2018 - 21/12/2018)
- Meydan, Turgut
Development of an acousto-ultrasonic prototype demonstrator for assessing the health of fibre-composite materials (01/03/2018 - 30/05/2018)
- Pullin, Rhys
Develop an integrated energy management system to monitor and control the virtue EV system (08/01/2018 - 07/01/2021)
- Jenkins, Nicholas
Design feasibility study for a low velocity tidal stream turbine (01/01/2018 - 31/12/2019)
- O'Doherty, Tim
Demand Response Integration tEchnologies: Unlocking the demand response potential in the distribution grid (01/12/2017 - 30/11/2020)
- Mourshed, Monjur
Developing a smart surgical tool for optimal dental implant fixation (01/12/2017 - 30/09/2018)
- Crivelli, Davide
Device enhanced performance of integrated concentrator photovoltaics and thermoelectrics (DEPICT) (05/10/2017 - 16/10/2017)
- Sweet, Tracy
Development of a passive mine water treatment tool (01/07/2017 - 30/11/2017)
- Sapsford, Devin
Development of a magnetic device (01/04/2017 - 31/01/2018)
- Eaton, Mark
Device enhanced performance integrated concentrator photovoltaics and thermoelectrics (01/04/2017 - 31/05/2018)
- Sweet, Tracy
Data analysis of the EASA nvPM system number and mass concentrations and additional size data analysis for the Trent SWB 84k database (01/03/2017 - 31/03/2017)
- Crayford, Andrew
Development of outdoor insulation test facility at Deeside (16/12/2016 - 28/03/2017)
- Haddad, Manu
Developing multi-material structures for enhanced energy absorption, for application to head protection (01/07/2016 - 31/12/2019)
- Theobald, Peter
Dynamic loadings on turbines in a tidal array (DyLoTTA) (01/07/2016 - 31/03/2020)
- O'Doherty, Tim
Data-drive multidisciplinary design optimization of aircraft structures under uncertainty (01/01/2016 - 31/12/2017)
- Kundu, Abhishek
Development of rapid annealing without induction (01/01/2016 - 31/12/2018)
- Valera Medina, Agustin
DC BH Loop characterisation, 3 samples (09/11/2015 - 21/12/2015)
- Anderson, Philip
Development of wear modelling capability for self-lubricating plain bearings (01/10/2015 - 31/03/2019)
- Clarke, Alastair
Delivering water security for all during shale gas production (01/04/2015 - 30/11/2015)
- Babatunde, Akintunde
Dynamic capacitive sensor for the measurement of millimeter-displacement of carbon composite panels: Applications to aircraft materials subjected to lightning strikes (31/01/2015 - 31/12/2016)
- Haddad, Manu
Development of an integrated 2D model for the risk assessment of floodplain floods and its application (27/01/2015 - 31/07/2015)
- Falconer, Roger
Decoupled Green Energy Supply (01/01/2015 - 30/06/2018)
- Valera Medina, Agustin
Developing a material for protecting the hand during elite Taekwondo training (01/01/2015 - 30/04/2015)
- Theobald, Peter
Development of new magnetic materials and composites by advanced materials fabrication processes (01/01/2015 - 31/12/2017)
- Hall, Jeremy
District of the Future (01/01/2015 - 31/10/2016)
- Wu, Jianzhong
Destructive testing of 10 off ceiling strut sections (19/11/2014 - 27/01/2015)
- Pullin, Rhys
Dynamic characterisation and modelling of RF GaN HEMTs (01/10/2014 - 30/09/2017)
- Tasker, Paul
Da vinci project - supplementary modelling (01/07/2014 - 31/12/2014)
- Hall, Jeremy
Destructive testing of ceiling strut (15/05/2014 - 30/09/2014)
- Pullin, Rhys
DC grid discriminating protection (01/04/2014 - 31/03/2017)
- Liang, Jun
DC magnetic testing of solenoid components (21/01/2014 - 20/01/2016)
- Anderson, Philip
Development and validation of powder supply chain (01/10/2013 - 30/09/2016)
- Setchi, Rossi
Development of dynamic demand models in DigSILENT powerfactory (01/09/2013 - 30/04/2016)
- Wu, Jianzhong
Device characterisation of GaN devices (01/09/2013 - 19/01/2015)
- Tasker, Paul
Developing a real time abstraction and discharge catchment management process (01/08/2013 - 31/10/2016)
- Rezgui, Yacine
DC grid control (01/06/2013 - 31/05/2014)
- Liang, Jun
DI ADC real time system further evaluation (01/06/2013 - 31/01/2014)
- Belcher, Raymond
Design and development of a R&D prototype grain viewer for electrical steels (12/11/2012 - 11/02/2013)
- Anderson, Philip
Determination of phosphorus adsorption capacity of DCWW's drinking water treatment works sludges across Wales (12/11/2012 - 01/06/2013)
- Babatunde, Akintunde
Design of efficient low cost brushless motors (01/10/2012 - 30/09/2014)
- Anayi, Fatih
Development and realisation of novel broadband high efficiency power amplifiers (01/10/2012 - 30/03/2016)
- Tasker, Paul
Development of robust broadband power amplifiers based on high voltage HBT's (01/10/2012 - 30/09/2016)
- Tasker, Paul
Development of a novel surgical planning tool for high tibial osteotomy and a used musculoskeletal model to determine the changes in internal knee loading (28/09/2012 - 01/05/2014)
- Whatling, Gemma
Destructive testing of ceiling struts (24/09/2012 - 27/02/2013)
- Pullin, Rhys
Development of an integrated numerical model for the flood risk management in urban areas and its application (01/09/2012 - 31/08/2013)
- Falconer, Roger
Development of a single phase active rectifier (01/08/2012 - 28/02/2013)
- Rogers, Daniel
Dynamic loading and data logging of an instrumented dumbell specimens at temperature (23/07/2012 - 22/09/2012)
- Pullin, Rhys
Determination of effects of reactive power compensation on distribution networks: Steady state and transient studies (02/07/2012 - 31/03/2014)
- Griffiths, Huw