Prosiectau (119)
Cardiff University Schools involved in this Project
Domains and microstructures in electrical steels (01.10.2006 - 30.06.2013)
Development of magnetic stimulation devices for medical applications (15.10.2008 - 31.07.2011)
- Melikhov, Yevgen
DCIP - Development of a construction information platform (11.11.2008 - 25.12.2009)
- Rezgui, Yacine
Design of hardware module enclosure II (01.08.2009 - 30.09.2009)
- Holford, KAREN
Development of magnetic torsion angle sensor (26.10.2009 - 25.10.2010)
DEF STAN 00-35, CL3 Solar Radiation Test, Irradiance Cycle Pro. "F" (10.11.2009 - 09.02.2010)
- O'Doherty, Tim
Development and process optimisation of a newly designed and novel ultrafine grinding mill (04.01.2010 - 31.07.2012)
Design assessment of a roller shutter door limiter (20.02.2010 - 19.05.2010)
- Evans, Samuel
Destructive testing of rivets (22.02.2010 - 21.03.2010)
- Pullin, Rhys
Design of hydraulic system for oil fluching of wind turbines (15.06.2010 - 14.08.2010)
- Evans, Samuel
Development of a test facility for a hydroventuri (01.07.2010 - 30.09.2010)
- O'Doherty, Tim
Development of energy efficient magnetic cooling for healthcare. Applications in refrigeration and pharmaceuticals (01.07.2010 - 31.12.2011)
- Porch, Adrian
Demonstrating the fuel economy benefit of exhaust energy recovery (01.09.2010 - 29.02.2012)
- Gao, Gao Min
Demand management through smart meters (01.10.2010 - 31.12.2013)
- Ekanayake, Janaka
DC magnetic testing of solenoid components (25.01.2011 - 24.03.2012)
- Anderson, Philip
DC magnetic testing of composite materials (13.07.2011 - 12.01.2012)
- Anderson, Philip
Development of novel techniques for the assessment of inter laminar resistance in transformer and reactor cores (01.10.2011 - 30.09.2014)
- Anderson, Philip
Development of power management and storage and efficient detection and wireless transmission for SHM systems (01.10.2011 - 30.09.2014)
- Featherston, Carol
Dynamic demand to support smart grid operation (01.10.2011 - 30.09.2014)
- Jenkins, Nicholas
Design, manufacture and impact testing of advanced composite materials (01.01.2012 - 31.07.2014)
- Evans, Samuel
DC magnetic testing of stainless steel samples (17.02.2012 - 16.05.2012)
- Anderson, Philip
Determination of effects of reactive power compensation on distribution networks: Steady state and transient studies (02.07.2012 - 31.03.2014)
- Griffiths, Huw
Dynamic loading and data logging of an instrumented dumbell specimens at temperature (23.07.2012 - 22.09.2012)
- Pullin, Rhys
Development of a single phase active rectifier (01.08.2012 - 28.02.2013)
- Rogers, Daniel
Development of an integrated numerical model for the flood risk management in urban areas and its application (01.09.2012 - 31.08.2013)
- Falconer, Roger
Destructive testing of ceiling struts (24.09.2012 - 27.02.2013)
- Pullin, Rhys
Development of a novel surgical planning tool for high tibial osteotomy and a used musculoskeletal model to determine the changes in internal knee loading (28.09.2012 - 01.05.2014)
- Whatling, Gemma
Design of efficient low cost brushless motors (01.10.2012 - 30.09.2014)
- Anayi, Fatih
Development and realisation of novel broadband high efficiency power amplifiers (01.10.2012 - 30.03.2016)
- Tasker, Paul
Development of robust broadband power amplifiers based on high voltage HBT's (01.10.2012 - 30.09.2016)
- Tasker, Paul
Design and development of a R&D prototype grain viewer for electrical steels (12.11.2012 - 11.02.2013)
- Anderson, Philip
Determination of phosphorus adsorption capacity of DCWW's drinking water treatment works sludges across Wales (12.11.2012 - 01.06.2013)
- Babatunde, Akintunde
DC grid control (01.06.2013 - 31.05.2014)
- Liang, Jun
DI ADC real time system further evaluation (01.06.2013 - 31.01.2014)
- Belcher, Raymond
Developing a real time abstraction and discharge catchment management process (01.08.2013 - 31.10.2016)
- Rezgui, Yacine
Development of dynamic demand models in DigSILENT powerfactory (01.09.2013 - 30.04.2016)
- Wu, Jianzhong
Device characterisation of GaN devices (01.09.2013 - 19.01.2015)
- Tasker, Paul
Development and validation of powder supply chain (01.10.2013 - 30.09.2016)
- Setchi, Rossi
DC magnetic testing of solenoid components (21.01.2014 - 20.01.2016)
- Anderson, Philip
DC grid discriminating protection (01.04.2014 - 31.03.2017)
- Liang, Jun
Destructive testing of ceiling strut (15.05.2014 - 30.09.2014)
- Pullin, Rhys
Da vinci project - supplementary modelling (01.07.2014 - 31.12.2014)
- Hall, Jeremy
Dynamic characterisation and modelling of RF GaN HEMTs (01.10.2014 - 30.09.2017)
- Tasker, Paul
Destructive testing of 10 off ceiling strut sections (19.11.2014 - 27.01.2015)
- Pullin, Rhys
Decoupled Green Energy Supply (01.01.2015 - 30.06.2018)
- Valera Medina, Agustin
Developing a material for protecting the hand during elite Taekwondo training (01.01.2015 - 30.04.2015)
- Theobald, Peter
Development of new magnetic materials and composites by advanced materials fabrication processes (01.01.2015 - 31.12.2017)
- Hall, Jeremy
District of the Future (01.01.2015 - 31.10.2016)
- Wu, Jianzhong
Development of an integrated 2D model for the risk assessment of floodplain floods and its application (27.01.2015 - 31.07.2015)
- Falconer, Roger
Dynamic capacitive sensor for the measurement of millimeter-displacement of carbon composite panels: Applications to aircraft materials subjected to lightning strikes (31.01.2015 - 31.12.2016)
- Haddad, Manu
Delivering water security for all during shale gas production (01.04.2015 - 30.11.2015)
- Babatunde, Akintunde
Development of wear modelling capability for self-lubricating plain bearings (01.10.2015 - 31.03.2019)
- Clarke, Alastair
DC BH Loop characterisation, 3 samples (09.11.2015 - 21.12.2015)
- Anderson, Philip
Data-drive multidisciplinary design optimization of aircraft structures under uncertainty (01.01.2016 - 31.12.2017)
- Kundu, Abhishek
Development of rapid annealing without induction (01.01.2016 - 31.12.2018)
- Valera Medina, Agustin
Developing multi-material structures for enhanced energy absorption, for application to head protection (01.07.2016 - 31.12.2019)
- Theobald, Peter
Dynamic loadings on turbines in a tidal array (DyLoTTA) (01.07.2016 - 31.03.2020)
- O'Doherty, Tim
Development of outdoor insulation test facility at Deeside (16.12.2016 - 28.03.2017)
- Haddad, Manu
Data analysis of the EASA nvPM system number and mass concentrations and additional size data analysis for the Trent SWB 84k database (01.03.2017 - 31.03.2017)
- Crayford, Andrew
Development of a magnetic device (01.04.2017 - 31.01.2018)
- Eaton, Mark
Device enhanced performance integrated concentrator photovoltaics and thermoelectrics (01.04.2017 - 31.05.2018)
- Sweet, Tracy
Development of a passive mine water treatment tool (01.07.2017 - 30.11.2017)
- Sapsford, Devin
Device enhanced performance of integrated concentrator photovoltaics and thermoelectrics (DEPICT) (05.10.2017 - 16.10.2017)
- Sweet, Tracy
Demand Response Integration tEchnologies: Unlocking the demand response potential in the distribution grid (01.12.2017 - 30.11.2020)
- Mourshed, Monjur
Developing a smart surgical tool for optimal dental implant fixation (01.12.2017 - 30.09.2018)
- Crivelli, Davide
Design feasibility study for a low velocity tidal stream turbine (01.01.2018 - 31.12.2019)
- O'Doherty, Tim
Develop an integrated energy management system to monitor and control the virtue EV system (08.01.2018 - 07.01.2021)
- Jenkins, Nicholas
Development of an acousto-ultrasonic prototype demonstrator for assessing the health of fibre-composite materials (01.03.2018 - 30.05.2018)
- Pullin, Rhys
Design and construction of the Meritt coil system (21.06.2018 - 21.12.2018)
- Meydan, Turgut
D-COM: Digitisation of requirements, regulations and compliance checking processes in the built environment (01.07.2018 - 31.12.2018)
- Beach, Tom
Developing radiomics as an imaging biomarker in high grade glioma (01.07.2018 - 26.09.2021)
- Spezi, Emiliano
DEDSO project (02.07.2018 - 31.12.2021)
- Wu, Jianzhong
Development of a dual-mode microwave-EPR reactor-resonator for studies of paramagnetic catalytic reactions (01.09.2018 - 31.05.2022)
- Porch, Adrian
Data mining in steel-making process under industry (01.10.2018 - 30.09.2021)
- Liu, Ying
Developing tolls for patient stratification in Osteoarthritis (OA) (01.10.2018 - 30.09.2021)
- Holt, Cathy
Developing an ultra-sonic screwdriver for detecting the overtightening of orthopaedic screws (01.11.2018 - 30.11.2019)
- Pullin, Rhys
Decision support tool for the operation of public sector multi energy systems (01.01.2019 - 31.12.2019)
- Abeysekera, Muditha
Design and additive manufacturing of a new composite Al-calamine material through a bilateral collaboration between Colombian and UK industry and academia (15.04.2019 - 30.08.2022)
- Setchi, Rossi
Digitisation of construction regulations (30.06.2019 - 29.06.2022)
- Beach, Tom
Development of a quantitative MRI phantom for knee tissue (01.07.2019 - 31.12.2022)
- Williams, David
Data-driven robust optimization of aircraft wing in early stage design (01.09.2019 - 30.11.2021)
- Kundu, Abhishek
Decarbonising Transport through Electrification, a whole system approach (DTE) (01.09.2019 - 31.12.2023)
- Cipcigan, Liana
Digital platform for construction in Europe (01.09.2019 - 31.05.2021)
- Rezgui, Yacine
Design And Development Of Vision-Based Tactile Sensor For Robotics Applications (01.10.2019 - 30.12.2023)
- Rayamane, Prasad
Development of advanced materials for enhanced head protection (01.10.2019 - 01.08.2023)
- Theobald, Peter
Designing and validating new medium voltage switchgear using alternative insulation gases (01.01.2020 - 31.07.2021)
- Haddad, Manu
DEDSO Stage 2 DLT Roadmap (28.01.2020 - 31.12.2025)
- Wu, Jianzhong
Disposable Torque Limiter Testing Project (01.02.2020 - 29.02.2020)
- Evans, Samuel
Development of innovative waste utilization processes methodologies for material removal processes (01.03.2020 - 31.12.2021)
- Packianather, Michael
Decarbonising oil: Microwave-catalytic production of clean hydrogen from fossil fuels (01.04.2020 - 30.06.2022)
- Slocombe, Daniel
Development of innovative TEG systems optimized for energy harvesting from EAF off-gas cooling water and radiative waste heat sources designed to be cost-effectively InTEGrated within steel plants (01.07.2020 - 31.12.2023)
- Gao, Gao Min
Development and testing of leaky barrier algorithms in the modelling of flood flows (27.08.2020 - 01.08.2022)
- Follett, Elizabeth
Designing an AM part for aerospace applications (12.10.2020 - 23.04.2021)
- Ryan, Michael
Does Soccer heading cause brain injury (15.10.2020 - 31.07.2022)
- Theobald, Peter
Dock to Dock (D2D) hydrogen eVTOL freight transportation (01.12.2020 - 30.11.2021)
- Valera Medina, Agustin
Drop-tube furnace to investigate novel reductants for the decarbonisation of ironmaking (01.12.2020 - 30.09.2021)
- Steer, Julian
Designing innovative helmets (04.01.2021 - 03.07.2023)
- Theobald, Peter
Decarbonising Jordanian Energy Systems Utilising Smart Solutions based on Energy Storage (01.04.2021 - 31.08.2023)
- Qadrdan, Meysam
Drop Tube Sample Preparation and Thermogravimetric Analysis of Coal Samples (01.04.2021 - 31.03.2022)
- Steer, Julian
Decarbonising shipping utilising renewable hydrogen (01.05.2021 - 30.11.2022)
- Allmark, Matthew