Projects (90)
Cardiff University Schools involved in this Project
Introduction of (a) CAD techniques to provide in-house electronic design capability; and (b) computer-based mechanical/acoustic modelling techniques to formalise currently informal design procedures (22/09/2004 - 21/12/2006)
Investigation of new magneto-elasto-caloric materials for device applications (01/08/2005 - 31/12/2010)
Investigation of high magnetostriction materials for advance sensors and actuators (01/04/2006 - 30/09/2009)
Investigation and design of HBT power amplifers for WiMax applications (25/09/2006 - 24/02/2010)
- Tasker, Paul
Integrated environmental and economical modelling of tidal renewable energy (01/07/2008 - 31/12/2010)
- Bockelmann-Evans, Bettina
IT Consultancy to African Union (06/04/2009 - 31/12/2011)
Impact of offshore networks on the insulation coordination and operation of the NG transmission system (01/07/2009 - 30/06/2013)
- Haddad, Manu
Influence of geochemical properties on the environmental impacts of mine wastes (01/08/2009 - 31/07/2011)
- Sapsford, Devin
Investigation of major and minor loop performance of permanent magnets (17/08/2009 - 16/02/2010)
- Anderson, Philip
Investigation of 2nd harmonic behaviour with output load in GaAs MMIC (02/12/2009 - 02/12/2009)
- Benedikt, Johannes
Impact testing of novel foam materials (01/04/2010 - 31/05/2010)
- Evans, Samuel
Investigate the theory, use and possible improvements of magnetic non-destructive evaluation technique for rail flaw detection (01/04/2010 - 30/06/2012)
- Melikhov, Yevgen
Increased reliability relevant automatic crack growth simulation with the eXtend (26/04/2010 - 27/04/2014)
- Bordas, Stephane
Investigation of potential hazards from fuel mists (01/11/2010 - 31/08/2011)
- Bowen, Philip
Identification, design and planning for the installation of technology to process residual materials arising from the Company's material recovery facility (17/02/2011 - 16/02/2013)
Initial modelling for COBALT (01/03/2011 - 30/04/2011)
- O'Doherty, Tim
Investigation into tar contamination in the Blaenavon mine water treatment scheme (01/03/2011 - 31/12/2011)
- Sapsford, Devin
Improvement of wireless powering systems (13/06/2011 - 12/07/2011)
- Melikhov, Yevgen
Investigation of engine block material (21/06/2011 - 20/07/2011)
- Evans, Samuel
Impact strength testing and flow testing (11/07/2011 - 04/09/2011)
- Pullin, Rhys
Impact strength testing and flow testing (11/07/2011 - 31/03/2012)
- Pullin, Rhys
Impact testing of carbon composite panels (16/11/2011 - 16/11/2011)
- Holford, KAREN
INSIST - Integrating numerical simulation and geometric design technology. (01/01/2012 - 31/12/2015)
- Bordas, Stephane
iCOAST:Integrated COASTal sediment systems (01/02/2012 - 30/04/2016)
- Pan, Shunqi
Impact strength testing and flow testing (13/02/2012 - 04/05/2012)
- Pullin, Rhys
IMV amplifier snubber development (13/02/2012 - 12/05/2012)
- Rogers, Daniel
Investigation of the effect of manufacturing parameters on the magnetic properties of motor laminations for automovtive applications (01/03/2012 - 01/12/2012)
- Anderson, Philip
Innovation in high voltage electrical insulation of electrical energy systems (16/04/2012 - 31/12/2014)
- Haddad, Manu
Investigation on the Feasibility of Trifluoroiodomethane (CF3I) for Application in Gas-Insulated Lines (01/07/2012 - 30/06/2015)
Initial analysis of london Underground track form (15/07/2012 - 31/10/2012)
- Karihaloo, Bhushan
Increasing the observability of electrical distribution systems using smart meters (30/09/2012 - 29/03/2014)
- Wu, Jianzhong
Implementation of the development of single protein fibre matrix composites for high performance cartilage repair device (01/02/2013 - 30/04/2015)
- Holt, Cathy
In situ recovery of resources from waste repositories (01/04/2013 - 30/09/2013)
- Sapsford, Devin
Integrated operation and planning for smart electric power distribution networks (OPEN) (21/04/2013 - 30/04/2016)
- Jenkins, Nicholas
Impuse testing (21/06/2013 - 20/07/2013)
- Griffiths, Huw
Implementing sustainable E&T programmes in the field of Radioactive Waste Disposal (01/09/2013 - 31/08/2016)
- Thomas, Hywel
Investigating the power density of power electronics (30/09/2013 - 29/09/2015)
- Rogers, Daniel
Increasing the acceptance of safety headwear within the climbing and mountaineering communities through use of new and novel engineering materials (10/10/2013 - 09/10/2014)
- Theobald, Peter
Identifying cost effective routes to optimised energy recovery for the fuel economy of vehicles (30/11/2013 - 28/02/2017)
- Gao, Gao Min
Investigation of the influence of transformer applications and steel manufacturing parameters on magnetostriction transformer noise and losses in grain oriented silicon steels (01/01/2014 - 30/06/2017)
- Anderson, Philip
Injection mass measurement BOSCH HDEV4.1 (06/01/2014 - 28/02/2014)
- Valera Medina, Agustin
Impact testing of composite samples (01/02/2014 - 31/07/2014)
- Pullin, Rhys
Input and auditing UU regional coastal modelling (21/03/2014 - 30/09/2014)
- Falconer, Roger
Incentives for clean vehicles in Urban Europe (01/04/2014 - 31/03/2017)
- Davies, Huw
Investigation into the feasibility of using seawater to treat acid mine drainage (01/06/2014 - 31/10/2014)
- Sapsford, Devin
Impact test of composite panel (01/07/2014 - 31/10/2014)
- Pullin, Rhys
Initial investigation into case hardened gear steels (29/07/2014 - 28/09/2014)
- Clarke, Alastair
In situ recovery of resources from waste repositories (01/09/2014 - 31/03/2019)
- Sapsford, Devin
Identifying degradation mechanisms and design systems for Perovskite solar cells in outdoor BIPV applications (01/10/2014 - 30/09/2017)
- Sweet, Tracy
Ionic mobility testing (24/11/2014 - 30/09/2015)
- Clark, David