Projects (121)
Cardiff University Schools involved in this Project
Domains and microstructures in electrical steels (01/10/2006 - 30/06/2013)
Development of magnetic stimulation devices for medical applications (15/10/2008 - 31/07/2011)
- Melikhov, Yevgen
DCIP - Development of a construction information platform (11/11/2008 - 25/12/2009)
- Rezgui, Yacine
Design of hardware module enclosure II (01/08/2009 - 30/09/2009)
- Holford, KAREN
Development of magnetic torsion angle sensor (26/10/2009 - 25/10/2010)
DEF STAN 00-35, CL3 Solar Radiation Test, Irradiance Cycle Pro. "F" (10/11/2009 - 09/02/2010)
- O'Doherty, Tim
Development and process optimisation of a newly designed and novel ultrafine grinding mill (04/01/2010 - 31/07/2012)
Design assessment of a roller shutter door limiter (20/02/2010 - 19/05/2010)
- Evans, Samuel
Destructive testing of rivets (22/02/2010 - 21/03/2010)
- Pullin, Rhys
Design of hydraulic system for oil fluching of wind turbines (15/06/2010 - 14/08/2010)
- Evans, Samuel
Development of a test facility for a hydroventuri (01/07/2010 - 30/09/2010)
- O'Doherty, Tim
Development of energy efficient magnetic cooling for healthcare. Applications in refrigeration and pharmaceuticals (01/07/2010 - 31/12/2011)
- Porch, Adrian
Demonstrating the fuel economy benefit of exhaust energy recovery (01/09/2010 - 29/02/2012)
- Gao, Gao Min
Demand management through smart meters (01/10/2010 - 31/12/2013)
- Ekanayake, Janaka
DC magnetic testing of solenoid components (25/01/2011 - 24/03/2012)
- Anderson, Philip
DC magnetic testing of composite materials (13/07/2011 - 12/01/2012)
- Anderson, Philip
Development of novel techniques for the assessment of inter laminar resistance in transformer and reactor cores (01/10/2011 - 30/09/2014)
- Anderson, Philip
Development of power management and storage and efficient detection and wireless transmission for SHM systems (01/10/2011 - 30/09/2014)
- Featherston, Carol
Dynamic demand to support smart grid operation (01/10/2011 - 30/09/2014)
- Jenkins, Nicholas
Design, manufacture and impact testing of advanced composite materials (01/01/2012 - 31/07/2014)
- Evans, Samuel
DC magnetic testing of stainless steel samples (17/02/2012 - 16/05/2012)
- Anderson, Philip
Determination of effects of reactive power compensation on distribution networks: Steady state and transient studies (02/07/2012 - 31/03/2014)
- Griffiths, Huw
Dynamic loading and data logging of an instrumented dumbell specimens at temperature (23/07/2012 - 22/09/2012)
- Pullin, Rhys
Development of a single phase active rectifier (01/08/2012 - 28/02/2013)
- Rogers, Daniel
Development of an integrated numerical model for the flood risk management in urban areas and its application (01/09/2012 - 31/08/2013)
- Falconer, Roger
Destructive testing of ceiling struts (24/09/2012 - 27/02/2013)
- Pullin, Rhys
Development of a novel surgical planning tool for high tibial osteotomy and a used musculoskeletal model to determine the changes in internal knee loading (28/09/2012 - 01/05/2014)
- Whatling, Gemma
Design of efficient low cost brushless motors (01/10/2012 - 30/09/2014)
- Anayi, Fatih
Development and realisation of novel broadband high efficiency power amplifiers (01/10/2012 - 30/03/2016)
- Tasker, Paul
Development of robust broadband power amplifiers based on high voltage HBT's (01/10/2012 - 30/09/2016)
- Tasker, Paul
Design and development of a R&D prototype grain viewer for electrical steels (12/11/2012 - 11/02/2013)
- Anderson, Philip
Determination of phosphorus adsorption capacity of DCWW's drinking water treatment works sludges across Wales (12/11/2012 - 01/06/2013)
- Babatunde, Akintunde
DC grid control (01/06/2013 - 31/05/2014)
- Liang, Jun
DI ADC real time system further evaluation (01/06/2013 - 31/01/2014)
- Belcher, Raymond
Developing a real time abstraction and discharge catchment management process (01/08/2013 - 31/10/2016)
- Rezgui, Yacine
Development of dynamic demand models in DigSILENT powerfactory (01/09/2013 - 30/04/2016)
- Wu, Jianzhong
Device characterisation of GaN devices (01/09/2013 - 19/01/2015)
- Tasker, Paul
Development and validation of powder supply chain (01/10/2013 - 30/09/2016)
- Setchi, Rossi
DC magnetic testing of solenoid components (21/01/2014 - 20/01/2016)
- Anderson, Philip
DC grid discriminating protection (01/04/2014 - 31/03/2017)
- Liang, Jun
Destructive testing of ceiling strut (15/05/2014 - 30/09/2014)
- Pullin, Rhys
Da vinci project - supplementary modelling (01/07/2014 - 31/12/2014)
- Hall, Jeremy
Dynamic characterisation and modelling of RF GaN HEMTs (01/10/2014 - 30/09/2017)
- Tasker, Paul
Destructive testing of 10 off ceiling strut sections (19/11/2014 - 27/01/2015)
- Pullin, Rhys
Decoupled Green Energy Supply (01/01/2015 - 30/06/2018)
- Valera Medina, Agustin
Developing a material for protecting the hand during elite Taekwondo training (01/01/2015 - 30/04/2015)
- Theobald, Peter
Development of new magnetic materials and composites by advanced materials fabrication processes (01/01/2015 - 31/12/2017)
- Hall, Jeremy
District of the Future (01/01/2015 - 31/10/2016)
- Wu, Jianzhong
Development of an integrated 2D model for the risk assessment of floodplain floods and its application (27/01/2015 - 31/07/2015)
- Falconer, Roger
Dynamic capacitive sensor for the measurement of millimeter-displacement of carbon composite panels: Applications to aircraft materials subjected to lightning strikes (31/01/2015 - 31/12/2016)
- Haddad, Manu
Delivering water security for all during shale gas production (01/04/2015 - 30/11/2015)
- Babatunde, Akintunde
Development of wear modelling capability for self-lubricating plain bearings (01/10/2015 - 31/03/2019)
- Clarke, Alastair
DC BH Loop characterisation, 3 samples (09/11/2015 - 21/12/2015)
- Anderson, Philip
Data-drive multidisciplinary design optimization of aircraft structures under uncertainty (01/01/2016 - 31/12/2017)
- Kundu, Abhishek
Development of rapid annealing without induction (01/01/2016 - 31/12/2018)
- Valera Medina, Agustin
Developing multi-material structures for enhanced energy absorption, for application to head protection (01/07/2016 - 31/12/2019)
- Theobald, Peter
Dynamic loadings on turbines in a tidal array (DyLoTTA) (01/07/2016 - 31/03/2020)
- O'Doherty, Tim
Development of outdoor insulation test facility at Deeside (16/12/2016 - 28/03/2017)
- Haddad, Manu
Data analysis of the EASA nvPM system number and mass concentrations and additional size data analysis for the Trent SWB 84k database (01/03/2017 - 31/03/2017)
- Crayford, Andrew
Development of a magnetic device (01/04/2017 - 31/01/2018)
- Eaton, Mark
Device enhanced performance integrated concentrator photovoltaics and thermoelectrics (01/04/2017 - 31/05/2018)
- Sweet, Tracy
Development of a passive mine water treatment tool (01/07/2017 - 30/11/2017)
- Sapsford, Devin
Device enhanced performance of integrated concentrator photovoltaics and thermoelectrics (DEPICT) (05/10/2017 - 16/10/2017)
- Sweet, Tracy
Demand Response Integration tEchnologies: Unlocking the demand response potential in the distribution grid (01/12/2017 - 30/11/2020)
- Mourshed, Monjur
Developing a smart surgical tool for optimal dental implant fixation (01/12/2017 - 30/09/2018)
- Crivelli, Davide
Design feasibility study for a low velocity tidal stream turbine (01/01/2018 - 31/12/2019)
- O'Doherty, Tim
Develop an integrated energy management system to monitor and control the virtue EV system (08/01/2018 - 07/01/2021)
- Jenkins, Nicholas
Development of an acousto-ultrasonic prototype demonstrator for assessing the health of fibre-composite materials (01/03/2018 - 30/05/2018)
- Pullin, Rhys
Design and construction of the Meritt coil system (21/06/2018 - 21/12/2018)
- Meydan, Turgut
D-COM: Digitisation of requirements, regulations and compliance checking processes in the built environment (01/07/2018 - 31/12/2018)
- Beach, Tom
Developing radiomics as an imaging biomarker in high grade glioma (01/07/2018 - 26/09/2021)
- Spezi, Emiliano
DEDSO project (02/07/2018 - 31/12/2021)
- Wu, Jianzhong
Development of a dual-mode microwave-EPR reactor-resonator for studies of paramagnetic catalytic reactions (01/09/2018 - 31/05/2022)
- Porch, Adrian
Data mining in steel-making process under industry (01/10/2018 - 30/09/2021)
- Liu, Ying
Developing tolls for patient stratification in Osteoarthritis (OA) (01/10/2018 - 30/09/2021)
- Holt, Cathy
Developing an ultra-sonic screwdriver for detecting the overtightening of orthopaedic screws (01/11/2018 - 30/11/2019)
- Pullin, Rhys
Decision support tool for the operation of public sector multi energy systems (01/01/2019 - 31/12/2019)
- Abeysekera, Muditha
Design and additive manufacturing of a new composite Al-calamine material through a bilateral collaboration between Colombian and UK industry and academia (15/04/2019 - 30/08/2022)
- Setchi, Rossi
Digitisation of construction regulations (30/06/2019 - 29/06/2022)
- Beach, Tom
Development of a quantitative MRI phantom for knee tissue (01/07/2019 - 31/12/2022)
- Williams, David
Data-driven robust optimization of aircraft wing in early stage design (01/09/2019 - 30/11/2021)
- Kundu, Abhishek
Decarbonising Transport through Electrification, a whole system approach (DTE) (01/09/2019 - 31/12/2023)
- Cipcigan, Liana
Digital platform for construction in Europe (01/09/2019 - 31/05/2021)
- Rezgui, Yacine
Design And Development Of Vision-Based Tactile Sensor For Robotics Applications (01/10/2019 - 30/12/2023)
- Rayamane, Prasad
Development of advanced materials for enhanced head protection (01/10/2019 - 01/08/2023)
- Theobald, Peter
Designing and validating new medium voltage switchgear using alternative insulation gases (01/01/2020 - 31/07/2021)
- Haddad, Manu
DEDSO Stage 2 DLT Roadmap (28/01/2020 - 31/12/2025)
- Wu, Jianzhong
Disposable Torque Limiter Testing Project (01/02/2020 - 29/02/2020)
- Evans, Samuel
Development of innovative waste utilization processes methodologies for material removal processes (01/03/2020 - 31/12/2021)
- Packianather, Michael
Decarbonising oil: Microwave-catalytic production of clean hydrogen from fossil fuels (01/04/2020 - 30/06/2022)
- Slocombe, Daniel
Development of innovative TEG systems optimized for energy harvesting from EAF off-gas cooling water and radiative waste heat sources designed to be cost-effectively InTEGrated within steel plants (01/07/2020 - 31/12/2023)
- Gao, Gao Min
Development and testing of leaky barrier algorithms in the modelling of flood flows (27/08/2020 - 01/08/2022)
- Follett, Elizabeth
Designing an AM part for aerospace applications (12/10/2020 - 23/04/2021)
- Ryan, Michael
Does Soccer heading cause brain injury (15/10/2020 - 31/07/2022)
- Theobald, Peter
Dock to Dock (D2D) hydrogen eVTOL freight transportation (01/12/2020 - 30/11/2021)
- Valera Medina, Agustin
Drop-tube furnace to investigate novel reductants for the decarbonisation of ironmaking (01/12/2020 - 30/09/2021)
- Steer, Julian
Designing innovative helmets (04/01/2021 - 03/07/2023)
- Theobald, Peter
Decarbonising Jordanian Energy Systems Utilising Smart Solutions based on Energy Storage (01/04/2021 - 31/08/2023)
- Qadrdan, Meysam
Drop Tube Sample Preparation and Thermogravimetric Analysis of Coal Samples (01/04/2021 - 31/03/2022)
- Steer, Julian
Decarbonising shipping utilising renewable hydrogen (01/05/2021 - 30/11/2022)
- Allmark, Matthew