Prosiectau (130)
Cardiff University Schools involved in this Project
Test additively manufactured machine windings (08.01.2024 - 30.04.2024)
- Clark, David
To develop a high-efficiency, flexible 2 KW solid-state microwavepower delivery system operating at 2.4-2.5 GHz to replace the inflexible and inefficient magnetron-based systems (01.11.2023 - 31.01.2026)
- Lees, Jonny
The Seagreen 1A offshore wind project (30.10.2023 - 29.11.2023)
- Anderson, Philip
Testing of a Wenkel engine for hydrogen/ammonia compatibility (01.09.2023 - 30.04.2024)
- Navaratne, Rukshan
The use of Rawwater M3 SF6 leak mitigation (21.08.2023 - 30.01.2024)
- Haddad, Manu
Teme nature based flood solutions, field monitoring and modelling study (10.02.2023 - 28.02.2025)
- Wilson, Catherine
Testing of injector materials (30.01.2023 - 14.04.2023)
- Navaratne, Rukshan
TidAl Range schemes as configurable Grid-scale Energy sTorage facilities (TARGET) (01.01.2023 - 31.12.2024)
- Ahmadian, Reza
To provide support for technical analysis and simulations for CAEP emission studies undertaken by ENVISA (15.09.2022 - 14.01.2023)
- Navaratne, Rukshan
To develop digital twins-based Asset Management System to effectively manage the batteries and power electronics converters in the VIRTUE so as to protect system lifetime and increase system reliability (10.08.2022 - 21.03.2026)
- Ming, Wenlong
The use of rawwater M3 SF6 leak mitigation (10.06.2022 - 31.03.2024)
- Haddad, Manu
Toward evaluating the performance of high voltage insulation for aerospace (01.05.2022 - 31.03.2023)
- Clark, David
To develop a BIM (Building Information Modelling) based data fusion digital twin, which can collect, clean, validate, analyse and visualise data from different perspectives (11.04.2022 - 10.04.2025)
- Li, Haijiang
Thermal conductivity measurement of 3 different aqueous suspensions using a Thermtest MP2 system and THW-L3 sensor. Three repeat measurements will be made for each suspension at 40degC. (01.02.2022 - 31.03.2022)
- Eaton, Mark
Tuneable microwave antenna aRrays optimizatioN for integration in RF Seekers (TURN) (01.02.2022 - 01.12.2024)
- Elgaid, Khaled
The renewably powered railway: renewable railway power network (01.11.2021 - 31.03.2023)
- Cipcigan, Liana
Towards CyberSHM: autonomous acousto-ultrasonic health monitoring of operational composite structures (01.11.2021 - 28.02.2025)
- Kundu, Abhishek
The corrosion and cracking mechanisms of assembled concrete structures exposed to a dry and cold sulfate environment (01.10.2021 - 31.08.2025)
- Zhu, Hanxing
Test Project 2 - Discovery Phase of deployment of CUSP on Reading Station for Network Rail (17.09.2021 - 27.04.2022)
- Rezgui, Yacine
Transforming the Foundation Industries Research and Innovation Hub (TransFIRE) (01.07.2021 - 30.06.2024)
- Setchi, Rossi
TETCRETE 2.0 – A comparison of polymers in tetrahedral reinforcement of concrete (01.06.2021 - 28.02.2022)
- Maddalena, Riccardo
Towards next generation infrastructures: Smart Hybrid Tendons for Concrete Self-healing (01.06.2021 - 31.05.2022)
- Balzano, Brunella
The answer lies in the soil: Environmental resilience in rural Wales (01.03.2021 - 30.11.2021)
- Follett, Elizabeth
Tensile testing of fibre optic cables for Rural Technologies Wales (25.01.2021 - 15.02.2021)
- Mahdi, Talib
To develop the capability to design improved protection and earthing systems that will ensure greater infrastructure resilience (05.01.2021 - 04.10.2023)
- Haddad, Manu
The evolution of the boundary between turbulent and irrotational flow in spilling breaking waves (14.12.2020 - 13.12.2024)
- Xie, Zhihua
Testing of a prototype aerospace component for AMRC (01.10.2020 - 31.03.2021)
- Clark, David
The EU Smart Building Innovation Platform — SMARTBUILT4EU (01.10.2020 - 31.03.2023)
- Rezgui, Yacine
To monitor the "in channel" sediment on the Taff Bargoed stream network using fieldwork methods (01.10.2020 - 31.03.2024)
- Wilson, Catherine
Training on laser fabrication on ion implantation of detects as quantum emitters (01.10.2020 - 30.09.2024)
- Bennett, Anthony
Tracer-free, non-intrusive, time- and space-resolved temperature and scalar measurements (01.08.2020 - 31.01.2024)
- Bowen, Philip
Technology transformation to support flexible and resilient local energy systems (01.04.2020 - 30.09.2023)
- Robson, Stephen
Turnover response system development (01.04.2020 - 28.02.2023)
- Ahmadian, Reza
Technology development towards sustainable marine current energy harvesting for coastal communities in Mexico (24.02.2020 - 17.03.2023)
- O'Doherty, Tim
To develop a thermal battery-based solution for district cooling applications capable of shifting cooling loads to periods of the day with less cooling demand (28.10.2019 - 27.04.2022)
- Jenkins, Nicholas
Taffs Well Thermal Spring - Heat recovery (14.10.2019 - 30.03.2020)
- Thomas, Hywel
The need for new sources of flexibility (01.05.2019 - 04.10.2024)
- Wu, Jianzhong
Tensile testing of fibre optic cables for Rural Technologies Wales (04.04.2019 - 31.05.2019)
- Mahdi, Talib
The development of self-sensing, self-healing concrete structures and the quantification of their value in the context of enhancing the delivery of a major highway project (01.04.2019 - 29.09.2020)
- Gardner, Diane
To gain new knowledge and capabilities in digital control methodologies to increase product functionality and transform the performance of Eriez products that will increase market share and enable access to new markets (01.03.2019 - 28.02.2022)
- Hall, Jeremy
The SAFEST Review: The shock-Absorbing Flooring Effectiveness SysTematic Review including older adults and staff in care settings (01.02.2019 - 31.03.2020)
- Keenan, Bethany
The development of a distributed ledger technology (DLT) micro-grid management platform (01.12.2018 - 30.06.2019)
- Wu, Jianzhong
The prospect of using mm-wave communications for 5G radio access (07.11.2018 - 06.11.2019)
- Quaglia, Roberto
Tensile testing (05.11.2018 - 26.11.2018)
- Davies, Aled
The role of technology and lifestyle interventions in Osteoarthritis (01.10.2018 - 30.09.2021)
- Holt, Cathy
To determine the elemental composition, thickness and structure of new materials on a microscopic scale (01.10.2018 - 30.04.2021)
- Bennett, Anthony
The Active Building Centre. (03.09.2018 - 30.09.2022)
- Wu, Jianzhong
To develop a compact and modular AC-DC power converter to replace the bulky AC-DC converter in the current PowerCore (01.05.2018 - 09.07.2021)
- Ming, Wenlong
Thermogravimetric analysis of coal samples 2018 (01.04.2018 - 25.05.2018)
- Steer, Julian
The analysis of mechanic factors and response in tumour microenvironment of metastasis (31.03.2018 - 31.12.2022)
- Yang, Chris
TowArds Building rEady for Demand rEsponse (01.11.2017 - 30.04.2021)
- Mourshed, Monjur
Topology optimisation in the early conceptual design phase (19.09.2017 - 31.07.2020)
- Kim, Hyunsun
Textured insulators (01.09.2017 - 30.06.2024)
- Haddad, Manu
- Transform the water pipe industry by raising the profile and uptake of composite piping by providing technological knowledge to product performance
(01.09.2017 - 30.03.2020)- Pullin, Rhys
Thermogravimetric analysis of coal samples (15.05.2017 - 14.06.2017)
- Steer, Julian
The holy grail of diabetes management: Bloodless, painless and accurate microwave continuous blood glucose monitor (01.05.2017 - 30.06.2021)
- Choi, Heungjae
To investigate the material for use as a sensor to monitor metabolites and cell culture media in the field of cell culture for biopharmaceuticals manufacturing, therapeutic and vaccine applications (25.04.2017 - 31.12.2018)
- Porch, Adrian
Tidal energy for sustainable village electricity supply (01.04.2017 - 31.03.2020)
- O'Doherty, Tim
Thermophoretic particle loss understanding at high temperature (01.12.2016 - 31.10.2017)
- Crayford, Andrew
Two-scale numerical simulations for fibre reinforced cementitious composites (16.10.2016 - 15.07.2019)
- Mihai, Iulia
Thermal simulation of heat flows within heart pump bearing (01.09.2016 - 31.10.2016)
- Clarke, Alastair
To develop an innovative, industry leading design and optimisation methodology and tool for the design and development of new trailer upper structure products (01.09.2016 - 31.08.2018)
- Clarke, Alastair
To radically improve the performance of protective helmets, reducing risk of head/brain injury by developing an impact-energy absorbing innovative material and introducing it to the equestrian market (02.05.2016 - 31.07.2019)
- Theobald, Peter
Tidal array cost reduction: testing a removable nacelle design for deltastream technology (01.05.2016 - 30.04.2017)
- O'Doherty, Tim
The role of surface chemistry and material properties on the fate of coals and coal chars during blast furnace coal injection (01.04.2016 - 30.09.2018)
- Steer, Julian
Tribology and materials development for novel power transmission coupling (04.01.2016 - 31.03.2017)
- Clarke, Alastair
The use of novel materials to enhance motorcyclist safety in developing countries (01.11.2015 - 31.10.2017)
- Theobald, Peter
-
- Pullin, Rhys
Technology platform evangelization and implementation of graphical system design in the context of improving science and engineering practical education and accelerating advanced research (02.02.2015 - 31.03.2017)
- Benedikt, Johannes
Towards the development of a public European environmental model suite for aviation (01.01.2015 - 31.12.2016)
- Crayford, Andrew
Towards the next generation of fast dynamics solvers in engineering (01.07.2014 - 30.06.2017)
- Kulasegaram, Siva
Traceable measurement of drive train components for renewable energy systems (01.07.2014 - 31.08.2017)
- Evans, Henry
To develop autonomous load cells through the development of power management electronics, wireless communication and energy harvesting technologies for a wide range of monitoring applications (16.06.2014 - 30.06.2016)
- Lees, Jonny
The functional and biological assessment of a novel orthopaedic implant material for the treatment of focal cartilage lesions (01.04.2014 - 31.07.2019)
- Holt, Cathy
Thermal inverse modelling and Olkiluoto monitoring programme (15.01.2014 - 31.12.2014)
- Thomas, Hywel
The anatomical effects of rotation on the cervical and lumbar spine: An MRI study (02.01.2014 - 11.07.2014)
- Yang, Chris
Technical experiments and investigations to generate mist and spray (03.10.2013 - 23.11.2014)
- Bowen, Philip
Testing of structural brackets (02.07.2013 - 01.09.2013)
- Pullin, Rhys
Thermoelectric heat recovery from low temperature exhausts of steel process (01.07.2013 - 30.06.2016)
- Gao, Gao Min
Three batches PFA - Mudstone samples: Kd testing for ARUP (01.07.2013 - 31.12.2013)
- Sapsford, Devin
Towards a Semantic Web of Things for Smart Cities (01.07.2013 - 30.06.2017)
- Howell, Shaun
Thermal evolution monitoring in Oikiluoto (15.04.2013 - 31.12.2013)
- Thomas, Hywel
To develop and implement a design methodology for textile tribological materials based upon first principle research, and utilise the methodology in design of new materials (01.03.2013 - 28.02.2015)
- Evans, Henry
To develop and market new state-of-the-art facilities in the finite element program LUSAS for soil-structure interaction problems (04.02.2013 - 30.06.2016)
- Jefferson, Anthony
To increase production output and sustainability of the current process via the integration of CAD-CAM, and design and commissioning of an automated brick cutting machinery together with the introduction of "fit" manufacturing system (04.02.2013 - 31.08.2015)
- Packianather, Michael
Towards rationalised computational expense for simulating fracture over multiple spatial scales (09.12.2012 - 08.12.2013)
- Kerfriden, Pierre
Tissue hydration during pre-parturitional cervical remodelling (01.10.2012 - 28.02.2014)
- Porch, Adrian
Testing of rucksacks (01.08.2012 - 31.08.2012)
- Pullin, Rhys
Tensile testing of dumbbell specimens (01.07.2012 - 31.08.2012)
- Pullin, Rhys
The effects of realistic tidal flows on the performance and structural integrity of tidal stream turbines (01.07.2012 - 30.09.2015)
- O'Doherty, Tim
Test of multi-terminal VSC HVDC control strategies by means of an analogue testing rig (01.02.2012 - 31.07.2012)
- Liang, Jun
To establish thermo electric module fabrication capability in the UK for creating a key energy device in the supply chain of energy harvesting systems. (01.02.2012 - 31.01.2014)
- Gao, Gao Min
To develop and market a state-of-the-art software module for non-linear earthquake analysis of civil engineering structures (27.12.2011 - 25.03.2015)
- Jefferson, Anthony
The European research infrastructure for thermochemical biomass conversion (BRISK) (01.10.2011 - 30.09.2015)
- Bowen, Philip
The role of the St David's Day group of universities in the future of community and regional regeneration in Wales (01.10.2011 - 30.09.2012)
- Pullin, Rhys
Transformation of the top and tail energy networks (01.10.2011 - 30.09.2015)
- Jenkins, Nicholas
The relationship between alignment, function and loading in total knee replacement: In-vivo analysis of a unique patient population (01.08.2011 - 31.07.2012)
- Holt, Cathy
The characterisation of 10 X-band gallium nitride devices (14.05.2011 - 30.09.2011)
- Tasker, Paul
Transfer of expertise and access to microengineering related facilities (03.05.2011 - 02.05.2013)
- Barrow, David
THERMOMAG - Nanostructured thermoelectrics based on Mg2Si (01.05.2011 - 31.10.2014)
- Gao, Gao Min